There is a new 6502 based computer!

Let's talk about anything related to the 6502 microprocessor.
Post Reply
lorddoomicus
Posts: 4
Joined: 10 Jul 2008
Location: Maryland
Contact:

There is a new 6502 based computer!

Post by lorddoomicus »

The fine folks at playpower.org have made the famicom platform available to the US:

http://www.makershed.com/ProductDetails ... Code=MKPP1

- Derrik
TMorita
Posts: 217
Joined: 15 Sep 2002

Re: There is a new 6502 based computer!

Post by TMorita »

lorddoomicus wrote:
The fine folks at playpower.org have made the famicom platform available to the US:

http://www.makershed.com/ProductDetails ... Code=MKPP1

- Derrik
Hmmm...that's interesting.

I hope they emulate an MMC1 or MMC3 cartridge. The stock NES basically expects its character graphics in ROM, and only carts that have a special MMC in them can use RAM for graphics.

(I did two projects on the NES in 1988-1989.)

Toshi
Nightmaretony
In Memoriam
Posts: 618
Joined: 27 Jun 2003
Location: Meadowbrook
Contact:

Post by Nightmaretony »

The idea is to be able to extend both ram and rom for programming purposes. QWe had good discussions :D
"My biggest dream in life? Building black plywood Habitrails"
lorddoomicus
Posts: 4
Joined: 10 Jul 2008
Location: Maryland
Contact:

Post by lorddoomicus »

Nightmaretony wrote:
The idea is to be able to extend both ram and rom for programming purposes. QWe had good discussions :D
QWe?

- Derrik
Nightmaretony
In Memoriam
Posts: 618
Joined: 27 Jun 2003
Location: Meadowbrook
Contact:

Post by Nightmaretony »

We. No brain here and welcome in! :)

also, are the MMC patents expired yet?
"My biggest dream in life? Building black plywood Habitrails"
User avatar
8BIT
Posts: 1787
Joined: 30 Aug 2002
Location: Sacramento, CA
Contact:

Re: There is a new 6502 based computer!

Post by 8BIT »

lorddoomicus wrote:
The fine folks at playpower.org have made the famicom platform available to the US:

http://www.makershed.com/ProductDetails ... Code=MKPP1

- Derrik
I just re-looked at the website and its on sale for $30 if anyone is intersted.

Edit - Its also out of stock so I may have been too late. There is a place to leave your email to be notified when more are available.
User avatar
BitWise
In Memoriam
Posts: 996
Joined: 02 Mar 2004
Location: Berkshire, UK
Contact:

Re: There is a new 6502 based computer!

Post by BitWise »

8BIT wrote:
lorddoomicus wrote:
The fine folks at playpower.org have made the famicom platform available to the US:

http://www.makershed.com/ProductDetails ... Code=MKPP1

- Derrik
I just re-looked at the website and its on sale for $30 if anyone is intersted.

Edit - Its also out of stock so I may have been too late. There is a place to leave your email to be notified when more are available.
The reviews are some what less than glowing
Andrew Jacobs
6502 & PIC Stuff - http://www.obelisk.me.uk/
Cross-Platform 6502/65C02/65816 Macro Assembler - http://www.obelisk.me.uk/dev65/
Open Source Projects - https://github.com/andrew-jacobs
Nightmaretony
In Memoriam
Posts: 618
Joined: 27 Jun 2003
Location: Meadowbrook
Contact:

Post by Nightmaretony »

Still has potential, am hoping the Playpower group can get the junk units weeded out, hope refunds can occur. would be better out here with a PS2 keyboard port and a tiny box instead. For developing countries where a ton can be shipped in for cheap, the entire unit would be a better bet.
"My biggest dream in life? Building black plywood Habitrails"
GordonZaft
Posts: 6
Joined: 10 Aug 2010
Location: Arizona, USA

Post by GordonZaft »

They are in stock again.

I'd be interested if it were possible to pull the ROM and install my own but I'm assuming it's probably soldered down.
Nightmaretony
In Memoriam
Posts: 618
Joined: 27 Jun 2003
Location: Meadowbrook
Contact:

Post by Nightmaretony »

I think that they are using a die on board with an epoxy glob over it. The computer itself is a NOAC kind of thing. (nintendo on a chip). not sure how, I will still have to get one in general...
"My biggest dream in life? Building black plywood Habitrails"
fachat
Posts: 1123
Joined: 05 Jul 2005
Location: near Heidelberg, Germany
Contact:

Re: There is a new 6502 based computer!

Post by fachat »

Hi there, does anyone know any updates on PlayPower? The website seems less than maintained...
Thanks
André
Author of the GeckOS multitasking operating system, the usb65 stack, designer of the Micro-PET and many more 6502 content: http://6502.org/users/andre/
Post Reply