FIG Forth ported to SYM-1

Topics relating to various Forth models on the 6502, 65816, and related microprocessors and microcontrollers.
Post Reply
HouseHarris
Posts: 48
Joined: 28 Nov 2010
Location: Newcastle Australia

FIG Forth ported to SYM-1

Post by HouseHarris »

Just dropping a note here that there is a FIG Forth ported to the SYM-1 sbc with 32k of ram installed done as part of the Symbiosys DOS project being discussed in the Programming section of this forum.

http://b5.net/sym1/symforth
Top
Post Reply

Return to “Forth”