Issue with Lattice GAL16V8Z

Topics relating to PALs, CPLDs, FPGAs, and other PLDs used for the support or creation of 65-family processors, both hardware and HDL.
Post Reply
Abdlrhman
Posts: 1
Joined: 15 Aug 2020

Issue with Lattice GAL16V8Z

Post by Abdlrhman »

first of all i could't find this specific chip in the software so i used GAL16V8 as it is pretty mush the same but i couldn't make it work so
what is the VPP voltage for this device i'm using Xgpro software with TL866II PLUS programmer
and what are Encrypt chip,flash and LOCKBIT options ?? Thnx
Top
SteveD
Posts: 15
Joined: 18 Apr 2020
Location: Canberra, Australia

Re: Issue with Lattice GAL16V8Z

Post by SteveD »

Hi,
are you using WinCUPL? If not, what are you using to create the fuse map?
Top
Post Reply

Return to “Programmable Logic”