6502.org Forum Projects Code Documents Tools Forum
It is currently Sat Nov 23, 2024 12:16 am

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 25 of 37
  [ 544 posts ]  Go to page Previous  1 ... 22, 23, 24, 25, 26, 27, 28 ... 37  Next
  Previous topic | Next topic 
Author Message
BigDumbDinosaur
 Post subject: Re: POC VERSION TWO
PostPosted: Thu Mar 30, 2017 5:29 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8507
Location: Midwestern USA
BigDumbDinosaur wrote:
In the process of sorting out this current mess, I accidentally downloaded the data sheet for the 28L202 DUART...and discovered that its write-up on the interrupt arbitration makes more sense...reading it...made me suspect that some type of non-zero value must be written into the ICR to activate interrupt arbitration, which I haven't done up until now...So the new plan of attack is to work out proper values for the ICR and BCRs (bidding control registers), add them to the setup data tables, and see if things start working.

Some progress to report. I was able to get the timer in the QUART's A-block to generate an IRQ that can be serviced. Timer A is responsible for making the jiffy IRQ functional, which is important to the overall function of the firmware. So this is a significant step forward. I'm currently observing the IRQ pulse train with a logic probe, and it appears that the IRQ is happening at the right rate.

I'm not out of the woods yet with this thing. I haven't solved the mystery of how to make receiver and transmitter IRQs work and I also have to concoct a method of dealing with a receiver overrun, as that generates a separate IRQ that will persist until the overrun status in the QUART channel is reset. However, I do know now how to set up the basic interrupt logic in the QUART, so I soon expect to see serial I/O working.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
jgroth
 Post subject: Re: POC VERSION TWO
PostPosted: Thu Apr 13, 2017 11:45 am 
Offline

Joined: Thu Sep 15, 2016 1:52 pm
Posts: 60
Location: UK
BigDumbDinosaur wrote:
Aslak3 wrote:
I've only seen ZIFs with rectangular pins; I assume your one has round pins?

It does, 18 mil pins, to be exact. It took some searching to find this socket but has worked out well.

I've been searching for one those myself but haven't found anything. I can see in the photo that manufacturer is Aries Electronics but what part number though? Where did you buy yours?
Top
 Profile  
Reply with quote  
GaBuZoMeu
 Post subject: Re: POC VERSION TWO
PostPosted: Thu Apr 13, 2017 1:12 pm 
Offline
User avatar

Joined: Wed Mar 01, 2017 8:54 pm
Posts: 660
Location: North-Germany
jgroth wrote:
BigDumbDinosaur wrote:
Aslak3 wrote:
I've only seen ZIFs with rectangular pins; I assume your one has round pins?

It does, 18 mil pins, to be exact. It took some searching to find this socket but has worked out well.

I've been searching for one those myself but haven't found anything. I can see in the photo that manufacturer is Aries Electronics but what part number though? Where did you buy yours?
Aries ZIF sockets are listed at Digikey. ECE manufactures ZIF sockets as well. Their pins are 0.7mm wide. Datasheet: http://www.tme.eu/en/Document/9a2ede4c58c96fe96331fca1d7802627/elk_series.pdf


----
edit(1): DS link added
Top
 Profile  
Reply with quote  
BigDumbDinosaur
 Post subject: Re: POC VERSION TWO
PostPosted: Thu Apr 13, 2017 4:57 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8507
Location: Midwestern USA
jgroth wrote:
BigDumbDinosaur wrote:
Aslak3 wrote:
I've only seen ZIFs with rectangular pins; I assume your one has round pins?

It does, 18 mil pins, to be exact. It took some searching to find this socket but has worked out well.

I've been searching for one those myself but haven't found anything. I can see in the photo that manufacturer is Aries Electronics but what part number though? Where did you buy yours?

The socket I use is Aries part number 28-6554-11. I got it from Mouser Electronics. Data sheet attached.


Attachments:
File comment: Aries ZIF Socket
socket_dip28_zif_aries.pdf [475.31 KiB]
Downloaded 114 times

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
BigDumbDinosaur
 Post subject: Re: POC VERSION TWO
PostPosted: Thu Apr 13, 2017 5:00 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8507
Location: Midwestern USA
GaBuZoMeu wrote:
ECE manufactures ZIF sockets as well. Their pins are 0.7mm wide. Datasheet: http://www.tme.eu/en/Document/9a2ede4c58c96fe96331fca1d7802627/elk_series.pdf

0.7 mm pins are too thick to be safely inserted in most DIP sockets. The Aries part I use has 18 mil round pins, roughly 0.45mm.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
jgroth
 Post subject: Re: POC VERSION TWO
PostPosted: Sat Apr 15, 2017 7:08 am 
Offline

Joined: Thu Sep 15, 2016 1:52 pm
Posts: 60
Location: UK
BigDumbDinosaur wrote:
jgroth wrote:
BigDumbDinosaur wrote:
Aslak3 wrote:
I've only seen ZIFs with rectangular pins; I assume your one has round pins?

It does, 18 mil pins, to be exact. It took some searching to find this socket but has worked out well.

I've been searching for one those myself but haven't found anything. I can see in the photo that manufacturer is Aries Electronics but what part number though? Where did you buy yours?

The socket I use is Aries part number 28-6554-11. I got it from Mouser Electronics. Data sheet attached.

Thank you.
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Wed Apr 26, 2017 5:11 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8507
Location: Midwestern USA
BigDumbDinosaur wrote:
I'll tell you...I'm really tempted to whip up a design using the ATF1508AS and two (maybe four) 29L92s. Those UARTs work great and with 16 deep FIFOs, they don't bang away at the MPU with IRQs like some other UARTs. However, POC V2 has to be made operative before anything new can be designed. 8) It's a rule around here!

The above was from November 2016. I really hate eating my own words, but it's time to open wide and starting the mastication process. :D POC V2, revision 0, is history. I've invested way too much time into trying to get that #*&$@*%^! QUART to work and have decided to put the computer on the shelf and let it collect dust.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!


Last edited by BigDumbDinosaur on Wed Apr 26, 2017 5:20 am, edited 1 time in total.

Top
 Profile  
Reply with quote  
whartung
 Post subject: Re: POC VERSION TWO
PostPosted: Wed Apr 26, 2017 6:11 pm 
Offline

Joined: Sat Dec 13, 2003 3:37 pm
Posts: 1004
So are you going to do a new board, with different UARTs?

As a complete, random, aside BDD.

I downloaded Wine for my Mac, and was able to run the ExpressPCB software. And I went to their online library or gallery or whatever it is. And the first thing it pulled up, no searching, just the first thing that showed up -- was the POC V2 board and schematic.
Top
 Profile  
Reply with quote  
BigDumbDinosaur
 Post subject: Re: POC VERSION TWO
PostPosted: Thu Apr 27, 2017 12:40 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8507
Location: Midwestern USA
whartung wrote:
So are you going to do a new board, with different UARTs?

I'm working on a redesign using two 28L92s.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
Aslak3
 Post subject: Re: POC VERSION TWO
PostPosted: Thu Apr 27, 2017 11:52 am 
Offline

Joined: Mon Aug 05, 2013 10:43 pm
Posts: 258
Location: Southampton, UK
BigDumbDinosaur wrote:
I'm working on a redesign using two 28L92s.


Are there no other Quads that are suitable? I've personally had good success with the SC16C654. Admittedly I doubt it's in production, but how much of a concern is that?

_________________
8 bit fun and games: https://www.aslak.net/
Top
 Profile  
Reply with quote  
BigDumbDinosaur
 Post subject: Re: POC VERSION TWO
PostPosted: Thu Apr 27, 2017 4:52 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8507
Location: Midwestern USA
Aslak3 wrote:
BigDumbDinosaur wrote:
I'm working on a redesign using two 28L92s.


Are there no other Quads that are suitable? I've personally had good success with the SC16C654. Admittedly I doubt it's in production, but how much of a concern is that?

The 16C654 doesn't have the timer(s) present in the NXP 26C/28C UARTs, so I can't use it in my design.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
8BIT
PostPosted: Thu Apr 27, 2017 6:31 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 9:02 pm
Posts: 1748
Location: Sacramento, CA
BigDumbDinosaur wrote:
POC V2, revision 0, is history. I've invested way too much time into trying to get that #*&$@*%^! QUART to work and have decided to put the computer on the shelf and let it collect dust.


Hey BDD,

Do you feel like sharing any of your code associated with the DUART? I'd hate to see POC V2 rev0 shelved. I would like to have look.

Daryl

_________________
Please visit my website -> https://sbc.rictor.org/
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Thu Apr 27, 2017 6:44 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8507
Location: Midwestern USA
8BIT wrote:
BigDumbDinosaur wrote:
POC V2, revision 0, is history. I've invested way too much time into trying to get that #*&$@*%^! QUART to work and have decided to put the computer on the shelf and let it collect dust.


Hey BDD,

Do you feel like sharing any of your code associated with the DUART? I'd hate to see POC V2 rev0 shelved. I would like to have look.

Daryl

POC V2 rev 0 uses a QUART. Is that what you meant?

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
8BIT
 Post subject: Re: POC VERSION TWO
PostPosted: Thu Apr 27, 2017 7:53 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 9:02 pm
Posts: 1748
Location: Sacramento, CA
Yes, sorry, my muscle memory hit D vs. Q. If you want to share, I'd be interested in having a look.

Daryl

_________________
Please visit my website -> https://sbc.rictor.org/
Top
 Profile  
Reply with quote  
BigDumbDinosaur
 Post subject: Re: POC VERSION TWO
PostPosted: Sun Apr 30, 2017 7:31 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8507
Location: Midwestern USA
8BIT wrote:
Yes, sorry, my muscle memory hit D vs. Q. If you want to share, I'd be interested in having a look.

Daryl

I'll have to post the entire firmware code, as it's spread out over many INCLUDE files—it's not practical to isolate just the QUART driver. If you are still interested let me know.

I've all but completed the design and PCB layout for POC V2, revision 1, which will use a pair of 28L92 DUARTs connected to MAX238s, instead of the MAX248 in revision 0. Although use of the MAX238s increases the total parts count, it turned out to be better in terms of the PCB layout.

While I was at it, I added some minor circuit refinements, reduced the number of discrete resistors, and changed the PCB layout around the 65C816 and the two SRAMs, the latter resulting in some slightly shorter circuit paths. I should have this mess ready for posting soon.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 25 of 37
  [ 544 posts ]  Go to page Previous  1 ... 22, 23, 24, 25, 26, 27, 28 ... 37  Next

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: No registered users and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.