6502.org Forum Projects Code Documents Tools Forum
It is currently Fri Nov 22, 2024 1:23 pm

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 2 of 2
  [ 21 posts ]  Go to page Previous  1, 2
  Previous topic | Next topic 
Author Message
BigDumbDinosaur
 Post subject: Re: 65SPI Bulk Order?
PostPosted: Thu Nov 14, 2013 5:58 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8505
Location: Midwestern USA
8BIT wrote:
Aslak3 wrote:
I know this might be considered cheeky, but is the source code for this part available? I'm interested because I'm in the process of setting myself up for CPLD/FPGA dev and have some of these CPLDs on order. It would be great to learn how it works, and of course, to integrate one into my own computer.


No worries - and as "wmmullaney" already pointed out, its on my website. Let me know if you have any questions about the code.

Daryl

The site appears to be off-line.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
HansO
 Post subject: Re: 65SPI Bulk Order?
PostPosted: Thu Nov 14, 2013 6:35 am 
Offline
User avatar

Joined: Fri Oct 31, 2003 10:00 pm
Posts: 200
BigDumbDinosaur wrote:
The site appears to be off-line.


And it appears to be up again!
Top
 Profile  
Reply with quote  
fachat
 Post subject: Re: 65SPI Bulk Order?
PostPosted: Sat Nov 16, 2013 3:00 pm 
Offline

Joined: Tue Jul 05, 2005 7:08 pm
Posts: 1043
Location: near Heidelberg, Germany
The source code provided is in ... ".abl" (IIRC Abel???)
ISE WebPack doesn't support it anymore. When I needed changes I had to rewrite it. Obviously less efficiently though :-)

_________________
Author of the GeckOS multitasking operating system, the usb65 stack, designer of the Micro-PET and many more 6502 content: http://6502.org/users/andre/
Top
 Profile  
Reply with quote  
8BIT
 Post subject: Re: 65SPI Bulk Order?
PostPosted: Sat Nov 23, 2013 4:59 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 9:02 pm
Posts: 1748
Location: Sacramento, CA
8BIT wrote:
I had an opportunity to acquire 30 9572's at a good price. That is more than enough to cover the 20 that were requested so I made the purchase.

The price is $4.25 each! So, for those who have requested parts, I will have them in hand Nov 23rd and will be programming them as soon as they arrive. Please send me a confirmation message with your mailing address so I can get the shipping estimated ahead of time. I will have approximately 10 extra so if anyone else is interested, please let me know.

These are 44 pin PLCC parts with a 7ns speed rating.

Thanks all!

Daryl


The parts arrived yesterday! I will program them up this weekend and start packaging them for delivery. I still have 4 available for anyone who is tuning it late.

Daryl

_________________
Please visit my website -> https://sbc.rictor.org/
Top
 Profile  
Reply with quote  
cbscpe
 Post subject: Re: 65SPI Bulk Order?
PostPosted: Fri Mar 07, 2014 2:49 pm 
Offline
User avatar

Joined: Sun Oct 13, 2013 2:58 pm
Posts: 491
Location: Switzerland
Hi Daryl,

would it be possible to put the SPI interface into this http://dangerousprototypes.com/docs/CPLD:_Complex_programmable_logic_devices one referred to by BigEd in this post http://forum.6502.org/viewtopic.php?f=10&t=2881? The XC9572XL has 5V tolerant inputs. So that could at least work together with TTL levels.

Peter
Top
 Profile  
Reply with quote  
8BIT
 Post subject: Re: 65SPI Bulk Order?
PostPosted: Fri Mar 07, 2014 8:16 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 9:02 pm
Posts: 1748
Location: Sacramento, CA
cbscpe wrote:
Hi Daryl,

would it be possible to put the SPI interface into this http://dangerousprototypes.com/docs/CPLD:_Complex_programmable_logic_devices one referred to by BigEd in this post http://forum.6502.org/viewtopic.php?f=10&t=2881? The XC9572XL has 5V tolerant inputs. So that could at least work together with TTL levels.

Peter


Hi Peter,

The program would fit into the XC9572XL and would work as designed. There may be some speed restraints at 3.3v vs 5v and you will have to experiment with the interface to TTL level signaling. In theory, it should work. I do not know if the Coolrunner CPLD would accommodate the design.

Daryl

_________________
Please visit my website -> https://sbc.rictor.org/
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 21 posts ]  Go to page Previous  1, 2

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: No registered users and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.