Page 1 of 1

Need help getting parts for my first 6502 learning adventure

Posted: Sun Jan 31, 2016 12:37 am
by M0001
Hi to all,

I've always wanted to do a simple 6502 project because I want to learn more about the inner workings of a computer and electronics in general. I just started reading the 6502 primer. But while Im doing that I want know the parts needed so I can get them immediately because from where I am it's almost impossible to get hobby parts. So I would have to order online from other countries and it takes ages to arrive.

So, my goal for this project is very simple.
1. Blinking LEDs
2. A button to control the LEDs. Turn on or off or slow or fast blink.

Here are parts I already have:
1. A MOS6502 chip with 4084 date code. So I want to work on the old NMOS chip for now

Please tell me the recommended parts needed for this simple project but with room for advancement in mind. I mean parts that can accomplish the blinking led as well as more advance ones so I don't have to re order.

Also include an EEPROM Programmer you recommend.

Re: Need help getting parts for my first 6502 learning adven

Posted: Sun Jan 31, 2016 1:35 am
by GARTHWILSON
Welcome. What country are you in? (Depending on what country you're in, various forum members may be able to offer helpful info on where to get parts.)

Edit: I see you added the location to your profile after I wrote the above.

Re: Need help getting parts for my first 6502 learning adven

Posted: Sun Jan 31, 2016 2:30 am
by M0001
GARTHWILSON wrote:
Welcome. What country are you in? (Depending on what country you're in, various forum members may be able to offer helpful info on where to get parts.)
I'm from the Philippines. I don't mind buying parts from eBay, mouser, digikey, etc.

Re: Need help getting parts for my first 6502 learning adven

Posted: Sun Jan 31, 2016 2:42 am
by BigDumbDinosaur
M0001 wrote:
I've always wanted to do a simple 6502 project because I want to learn more about the inner workings of a computer and electronics in general...I want know the parts needed so I can get them immediately because from where I am it's almost impossible to get hobby parts. So I would have to order online from other countries and it takes ages to arrive.
First off, welcome to 6502.org.

There is a very large amount of information here, including some on how to obtain parts. BTW, be sure to stop over here and tell everyone a little bit about yourself.

Re: Need help getting parts for my first 6502 learning adven

Posted: Sun Jan 31, 2016 2:46 am
by BigDumbDinosaur
M0001 wrote:
GARTHWILSON wrote:
Welcome. What country are you in? (Depending on what country you're in, various forum members may be able to offer helpful info on where to get parts.)
I'm from the Philippines. I don't mind buying parts from eBay, mouser, digikey, etc.
I mostly purchase through Mouser, but do source certain items from Digi-Key. Mouser sells genuine WDC parts, such as the W65C02S, W65C22S, etc., and is a "safe" source for them. Recently, another member had purchased what he thought were genuine W65C816S processors through a source other than an authorized distributor. It appears that he was sold counterfeits. So please be cautious when you go the eBay route. Most eBay vendors are honest...