6502.org

Spent some time last night outlining and cleaning the logos and test patterns. To me it looks like the 65 and .D are on multiple layers - maybe all? Might have time to do some cutting tonight.

Yes, could be all layers. The 2 is on layer 6 - metal - and that makes sense, because we believe the 6501 only differed in the metal patterning. Not sure why the 0 should be special.

First cut of the 6502 - this is the metal layer - should not really have worried so much about the logos as they have ended up pretty small. Took about 45 mins on the laser which is not too bad.

Brilliant! I can almost see the colours but that must just be my brain filling in.

Have cut the last 2 layers - labelled poly and subsplits. This is still a bit prototype - had a scaling issue with the vias so they don't line up correctly.