6502.org • View topic - How to build the word "CREATE" in fig forth

View unanswered posts | View active topics

Board index » 6502.org Users Forum » Forth

All times are UTC

How to build the word "CREATE" in fig forth

Page 1 of 1

[ 4 posts ]

Previous topic | Next topic

Author

Message

Powersoft

Post subject: How to build the word "CREATE" in fig forth

Posted: Fri Jun 18, 2021 3:25 pm

Joined: Thu May 13, 2021 8:56 am
Posts: 31
Location: Hellevoetsluis-NL

Hello,
is it possible to emulate the word "CREATE" in the old fig forth so I can insert some bytes in the directory like,

create test 81 c, 82 c, 83 c,
and when I call test the address of the first byte will be on the stack.

Thank for any help.
Cheers,
Jan

Top

SamCoVT

Post subject: Re: How to build the word "CREATE" in fig forth

Posted: Fri Jun 18, 2021 5:13 pm

Joined: Sun May 13, 2018 5:49 pm
Posts: 255

Code:

HERE 81 C, 82 C, 83 C, CONSTANT TEST

Here's a sample run where I then read back the three bytes from RAM:

Code:

HERE 81 C, 82 C, 83 C, CONSTANT TEST OK
test c@ . 81 OK
test 1 + c@ . 82 OK
test 2 + c@ . 83 OK

Note that the header for this word ends up AFTER the data.

If you'd like to have the header first so that you can keep adding more data, you might like:

Code:

: MYCREATE <BUILDS DOES> ;

along with a sample run:

Code:

: MYCREATE <BUILDS DOES> ; OK
MYCREATE TEST 81 C, 82 C, 83 C, OK
TEST C@ . 81 OK
TEST 1+ C@ . 82 OK
TEST 2 + c@ . 83 OK

Top

IamRob

Post subject: Re: How to build the word "CREATE" in fig forth

Posted: Fri Jun 18, 2021 8:25 pm

Joined: Sun Apr 26, 2020 3:08 am
Posts: 357

Last edited by IamRob on Sun Jun 20, 2021 4:40 am, edited 1 time in total.

Top

Powersoft

Post subject: Re: How to build the word "CREATE" in fig forth

Posted: Fri Jun 18, 2021 8:54 pm

Joined: Thu May 13, 2021 8:56 am
Posts: 31
Location: Hellevoetsluis-NL

SamCoVT wrote:

Code:

HERE 81 C, 82 C, 83 C, CONSTANT TEST

Here's a sample run where I then read back the three bytes from RAM:

Code:

HERE 81 C, 82 C, 83 C, CONSTANT TEST OK
test c@ . 81 OK
test 1 + c@ . 82 OK
test 2 + c@ . 83 OK

Note that the header for this word ends up AFTER the data.

If you'd like to have the header first so that you can keep adding more data, you might like:

Code:

: MYCREATE <BUILDS DOES> ;

along with a sample run:

Code:

: MYCREATE <BUILDS DOES> ; OK
MYCREATE TEST 81 C, 82 C, 83 C, OK
TEST C@ . 81 OK
TEST 1+ C@ . 82 OK
TEST 2 + c@ . 83 OK

thanks, this is what i was looking for.

Top

Page 1 of 1

[ 4 posts ]

Board index » 6502.org Users Forum » Forth

All times are UTC

Who is online

Users browsing this forum: No registered users and 12 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum