6502.org Forum Projects Code Documents Tools Forum
It is currently Sun Nov 24, 2024 11:44 am

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Previous topic | Next topic 
Author Message
A0CBM
 Post subject: Custom Circuit Board
PostPosted: Tue Dec 01, 2020 4:35 pm 
Offline

Joined: Wed Nov 04, 2015 11:10 am
Posts: 51
I have a few things that I have built for my VIC 20 and would like to have boards made. I live in Michigan, USA, and have schematics of my projects and some use Xilinx XC9536s and XC9572s. Where can I go to have one made for one of my projects and what is required? I do not have any board designs, just schematics.
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Custom Circuit Board
PostPosted: Tue Dec 01, 2020 7:27 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8546
Location: Southern California
The custom PC boards page of the 6502 primer and the links in it should answer all your questions. (I just checked to make sure all the links are still good too.) If it doesn't, come ask, and I and others here will try to answer, and I'll add it to the page.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
greghol
 Post subject: Re: Custom Circuit Board
PostPosted: Thu Dec 03, 2020 5:13 am 
Offline

Joined: Fri Oct 04, 2019 4:26 am
Posts: 23
Location: Rancho Cordova, CA
There are several option to make PCBs. Here are just a few that are popular for hobbyist:

Eagle
KiCad
easyEDA

Here is a RC2014 Xilinx 84 pin 9572/95108 board I did on EasyEDA.
Edit: I had these made at JLCPCB last year. < $20 for 10 boards, ordered to received in 7 days!

https://easyeda.com/greghol/rc2014-xili ... cpld-board

Greg
Top
 Profile  
Reply with quote  
A0CBM
 Post subject: Re: Custom Circuit Board
PostPosted: Thu Dec 03, 2020 1:43 pm 
Offline

Joined: Wed Nov 04, 2015 11:10 am
Posts: 51
I am going to try PCB123. Has anyone used it, or have any comments on it?
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: No registered users and 56 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.