6502.org Forum  Projects  Code  Documents  Tools  Forum
It is currently Sat Nov 23, 2024 2:31 pm

All times are UTC




Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Testing 6502 CPUs
PostPosted: Sun Feb 02, 2020 8:14 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8545
Location: Southern California
Chromatix wrote:
Mouser prices a W65C02S at $7 - plus shipping & handling. The latter could raise the perceived price rather a lot over the nominal one, even if the order also contains some glue logic chips and a breadboarding kit. It really is enough to make a novice think "I don't need a 14MHz 6502, maybe a second-hand one that runs at 1MHz or so would be cheaper." And they're not yet experienced enough to know the finer differences that come with it, nor how to distinguish a counterfeit from the genuine article, nor where to reliably obtain the latter at a reasonable total cost.

From the front page of my site, for the person who is satisfied with 1MHz NMOS:

    And: I have 110 6512 microprocessors I bought in the mid-1980's for a project I never went through with, to make an inexpensive SBC for education, hobby, and light industrial applications. The 6512 is a 6502 whose Φ1 pin is an input rather than an output, and you would normally drive the Φ0 and Φ1 inputs using both the Q and Q\ outputs of a 74xx74. The 6512 also has a DBE (data bus enable) pin (pin 36). The data sheet says, "This input allows external control of the three-state data output buffers and will enable the microprocessor bus driver when in the high state. In normal operation DBE would be driven by the Φ2 clock, thus allowing data output from microprocessor only during Φ2." It also says this external-clock version is "geared for the multi-processor system applications where maximum timing control is mandatory." (It can be used in a single-processor system too though of course.) Make me a reasonable offer for some or all of them. I could sell them one at a time, but I prefer not to.

shipping from Southern California

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?


Top
 Profile  
Reply with quote  
 Post subject: Re: Testing 6502 CPUs
PostPosted: Sun Feb 02, 2020 9:33 pm 
Offline
User avatar

Joined: Thu May 14, 2015 9:20 pm
Posts: 155
Location: UK
If you are new to this hobby / microprocessor systems, you may not know the details that experienced members here are aware of regarding which suppliers are trusted and which are lottery sellers.

I strongly suspect that a lot of Chinese sellers are purely resellers. As you can buy items from two different sellers, and end up with two identical items with the same stock code sticker on it. Different sellers using the same photos and very similar descriptions reinforce this perception. However, not everything is exactly the same as Chinese manufacturers copy products from other Chinese manufacturers.

With any market, if something proves popular, and there is a cheap way of supplying this demand, you will get substandard items being sold. So obtaining pulls, cleaning the pins, maybe re-tinning, cleaning off the old markings and applying new markings for an item that the market wants is bound to happen.

The companies that are doing the cleaning and remarking may not even know the full technical details of the differences between the different chips that they are remarking. As far as they are concerned, they are just old parts that can be cleaned and remarked and sold ‘as new’, hence the recent date codes.

I suspect at least some of the resellers may not know the history of the items that they are selling. They are just selling what their competition are selling...

The other point that I want to raise, is that remarked chips or maybe substandard parts also find their way into the DIY electronic kits that these resellers also sell.

It is possible that some of the ‘current production’ parts that are available from the same resellers are also either remarked chips, substandard parts, or locally produced, but unlicensed copies, and with no way of telling until the buyer tests them himself/herself whether they meet the specifications of the real parts available from trusted official distributors.

Mark


Top
 Profile  
Reply with quote  
 Post subject: Re: Testing 6502 CPUs
PostPosted: Mon Feb 03, 2020 11:07 am 
Offline

Joined: Sun Apr 10, 2011 8:29 am
Posts: 597
Location: Norway/Japan
I just tried to place an order for a 65c02 at Jameco: $6.95+$5 (b/c < $15) + 17.99, total $29.94.

This is better than it used to be - it's again possible to select "USPS First Class International" (no insurance), there was a time when the only choice was the double-priced next option.

Still, one can see why trying to order genuine chips at low quantities isn't particularly attractive. If I buy, say, five chips, the per-price drops to $10.54, but the total ($52.74) triggers VAT handling, which isn't the worst, it's that this also adds VAT handling charges which is a killer. So one is between a rock and a hard place. Now, where was that eBay link again.. :)


Top
 Profile  
Reply with quote  
 Post subject: Re: Testing 6502 CPUs
PostPosted: Mon Feb 03, 2020 2:12 pm 
Offline
User avatar

Joined: Thu May 14, 2015 9:20 pm
Posts: 155
Location: UK
Tor wrote:
Now, where was that eBay link again.. :)
Here you go the bound to be remarked 6502 lottery (not recommended unless you just want it for eye candy) :twisted:


Top
 Profile  
Reply with quote  
 Post subject: Re: Testing 6502 CPUs
PostPosted: Mon Feb 03, 2020 5:08 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8509
Location: Midwestern USA
Tor wrote:
If I buy, say, five chips, the per-price drops to $10.54, but the total ($52.74) triggers VAT handling, which isn't the worst, it's that this also adds VAT handling charges which is a killer. So one is between a rock and a hard place. Now, where was that eBay link again.. :)

If something were to be shipped to you and declared as a gift for customs purposes, would VAT still be assessed?

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2

All times are UTC


Who is online

Users browsing this forum: No registered users and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: