6502.org Forum Projects Code Documents Tools Forum
It is currently Sun Nov 24, 2024 9:13 am

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Previous topic | Next topic 
Author Message
ChuckT
PostPosted: Wed Jan 08, 2014 1:34 pm 
Offline

Joined: Wed May 20, 2009 1:06 pm
Posts: 491
http://hackaday.com/2014/01/06/overhaul ... rogrammer/

Quote:
The device is based on the Willem 5.0e programmer.


Some of you who are DIY people might appreciate this article.
Top
 Profile  
Reply with quote  
BigEd
PostPosted: Wed Jan 08, 2014 6:36 pm 
Offline
User avatar

Joined: Thu Dec 11, 2008 1:28 pm
Posts: 10986
Location: England
I notice one of the commenters recommends the approx $50 TL866CS.
Top
 Profile  
Reply with quote  
Simon
PostPosted: Thu Jan 09, 2014 5:24 pm 
Offline

Joined: Mon Apr 16, 2007 6:04 am
Posts: 155
Location: Auckland, New Zealand
Looking at the comments on there reminded me why I stopped reading Hack-a-day. I stopped posting my projects on there because you'd get so many negative and uninformed comments from people who didn't know what they were talking about. It always amazed me the number of people on there who think a project is a waste of time but would still take the time to tell everyone so.

I find this (and a very few other) forums much more encouraging and positive.

Anyone used that TL866CS mentioned?

Simon

_________________
My 6502 related blog: http://www.asciimation.co.nz/bb/category/6502-computer
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Thu Jan 09, 2014 6:36 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8514
Location: Midwestern USA
Simon wrote:
Looking at the comments on there reminded me why I stopped reading Hack-a-day. I stopped posting my projects on there because you'd get so many negative and uninformed comments from people who didn't know what they were talking about. It always amazed me the number of people on there who think a project is a waste of time but would still take the time to tell everyone so.

Unfortunately, that sort of crass behavior isn't at all unique to Hack-a-day. I see examples of it all over the 'Net.

You can draw some solace from the fact that most of the individuals who are writing uninformed criticism have never actually accomplished anything of value in the area in which they profess to be knowledgable. They criticize so they can appear to be wise in the eyes of other uninformed readers. At least around here, if someone says something negative about a design they are likely to have some basis from which to do so.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
Simon
PostPosted: Fri Jan 10, 2014 7:44 pm 
Offline

Joined: Mon Apr 16, 2007 6:04 am
Posts: 155
Location: Auckland, New Zealand
The more specialised the topic the better the forum I find. I like posting here, if someone here tells me I am an idiot I'll believe them and fix it!

Simon

_________________
My 6502 related blog: http://www.asciimation.co.nz/bb/category/6502-computer
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Fri Jan 10, 2014 11:15 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8514
Location: Midwestern USA
Simon wrote:
The more specialised the topic the better the forum I find. I like posting here, if someone here tells me I am an idiot I'll believe them and fix it!

Simon

Yer an idiot! :lol: Just kidding!

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
Simon
PostPosted: Sat Jan 11, 2014 7:02 pm 
Offline

Joined: Mon Apr 16, 2007 6:04 am
Posts: 155
Location: Auckland, New Zealand
BigDumbDinosaur wrote:
Simon wrote:
The more specialised the topic the better the forum I find. I like posting here, if someone here tells me I am an idiot I'll believe them and fix it!

Simon

Yer an idiot! :lol: Just kidding!

Am busy doing idiotic things in car building mode but will be back to doing idiotic things in computer building mode soon. I need to look at getting a real PCB for my computer made. Then I can start adding some IO modules to it. I have a little POS printer here I would like to hook to it as well as some provision to do general IO as one of the Usborne books I want to review is all about doing that. Eventually I will end up rebuilding the little robot I first built 25 years ago!

I do wonder what that other EPROM burner is like. I have an earlier parallel Willem type (3.5?) and it took lots of fiddling to get it working well. I had to hardware mode it with a relay to make sure it was switching the full programming voltage in the end. A friend bought a more modern one recently and even that took a lot of messing about to get it working.

Simon

_________________
My 6502 related blog: http://www.asciimation.co.nz/bb/category/6502-computer
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: Google [Bot] and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.