6502.org Forum Projects Code Documents Tools Forum
It is currently Sun Nov 24, 2024 12:01 am

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
Michael
PostPosted: Sun Apr 28, 2013 6:47 pm 
Offline
User avatar

Joined: Wed Feb 13, 2013 1:38 pm
Posts: 589
Location: Michigan, USA
Greetings:

Can anyone point me in the right direction for learning about GALs, please? Also, do you know of any decent designs for a DIY GAL programmer?

I'm currently reading this article; GALS for Electronics Hobby

TIA and cheerful regards, Mike
Top
 Profile  
Reply with quote  
8BIT
PostPosted: Sun Apr 28, 2013 7:38 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 9:02 pm
Posts: 1748
Location: Sacramento, CA
You can try this:
http://www.armory.com/~rstevew/Public/P ... kMe1st.htm

These will most likely work with Lattice GALS but most likely will NOT work with Atmel GALs, but I make no promises.
http://www.ebay.com/itm/260857061892
Search this forum for G540 and you will find some discussion on this programmer.

My older Genius NSP programmer works with Lattice devices but not with Atmel devices.

Daryl

_________________
Please visit my website -> https://sbc.rictor.org/


Last edited by 8BIT on Mon Apr 29, 2013 2:21 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
ElEctric_EyE
PostPosted: Sun Apr 28, 2013 7:43 pm 
Offline

Joined: Mon Mar 02, 2009 7:27 pm
Posts: 3258
Location: NC, USA
8BIT wrote:
...My older Genius NSP programmer works with Lattice devices but not with Atmel devices.

Daryl

I can confirm this issue as well on my Genius G540 programmer. I think Atmel is more proprietary with their programming algorithm.

_________________
65Org16:https://github.com/ElEctric-EyE/verilog-6502
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Sun Apr 28, 2013 9:13 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8513
Location: Midwestern USA
ElEctric_EyE wrote:
8BIT wrote:
...My older Genius NSP programmer works with Lattice devices but not with Atmel devices.

I can confirm this issue as well on my Genius G540 programmer. I think Atmel is more proprietary with their programming algorithm.

Ditto with my TOPS850 programmer. It thinks that it has successfully programmed an Atmel GAL but the GAL doesn't work.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
Michael
PostPosted: Wed May 01, 2013 12:29 pm 
Offline
User avatar

Joined: Wed Feb 13, 2013 1:38 pm
Posts: 589
Location: Michigan, USA
Thanks for the info, guys.

How about this programmer? It lists the Lattice GAL22V10 devices in its list of supported devices?

Also, I didn't see any TOP850 programmers listed on ebay but there are some TOP853 programmers. Can I assume those are the next generation of the older TOP850?
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Wed May 01, 2013 2:16 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8513
Location: Midwestern USA
Michael wrote:
Also, I didn't see any TOP850 programmers listed on ebay but there are some TOP853 programmers. Can I assume those are the next generation of the older TOP850?

Probably, but who knows for sure. Documentation is always a problem with this stuff.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
8BIT
PostPosted: Wed May 01, 2013 7:24 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 9:02 pm
Posts: 1748
Location: Sacramento, CA
Hi Michael,

One thing you should research is the availability of Lattice GAL's. They stopped making them a few years back (exact date anyone??) and they are harder to find and the cost is going up on the ones that are left. I'd hate to see you spend a lot on a programmer and THEN discover that the GAL's arte not available.

Good Luck!

Daryl

_________________
Please visit my website -> https://sbc.rictor.org/
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Thu May 02, 2013 3:49 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8513
Location: Midwestern USA
8BIT wrote:
One thing you should research is the availability of Lattice GAL's. They stopped making them a few years back (exact date anyone??)...

From the Lattice product change notice (PCN) announcing the discontinuation of the GAL product line:

  • Last Time Buy Order Date November 19, 2007
  • Last Shipment Date May 19, 2008

That's from PCN #06A-07.

Quote:
...and they are harder to find and the cost is going up on the ones that are left. I'd hate to see you spend a lot on a programmer and THEN discover that the GAL's arte not available.

Daryl's right. Atmel is the only significant source for new GALs at this time, although you can still find Lattice ones through some suppliers and on eBay. The problem is finding a burner that "knows" the proprietary Atmel algorithms. If the TOPS853 is similar to the TOPS850 then you'd be out of luck. You're probably better focusing on low end CPLDs, although hobby-friendly 5 volt examples are becoming a bit scarce here and there. Again, Atmel continues to produce 5 volt CPLDs, but I'm not certain what the programming options are beyond purchasing their burner unit (which I have).

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
clockpulse
PostPosted: Thu May 02, 2013 4:30 am 
Offline

Joined: Sat Oct 20, 2012 8:41 pm
Posts: 87
Location: San Diego
I built a ByteBlaster from this schematic (with a few mods) and it works fine.
I have tested it with the Atmel ATF1504AS and ATF1508AS CPLD's. Should of course also work with the 1502 as well.

http://www.pyroelectro.com/tutorials/by ... matic.html

I had to remove the (5) 2.2k pullup resistors for it to operate stable with my parallel port.
If you disconnect the 100 ohm resistor that goes to pin 14 of the parallel port and ground it, then it will work as an Atmel ISPMV cable.

For programming software just use Atmel ISP (free download from Atmel), tested with version 6.7
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: Google [Bot] and 74 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.