It's always nice to have one's favorite programming environment available, isn't it? That's probably why I'm still fooling around with Thompson AWK in the first place!

I have noticed when using Bitwise's assembler, the org. starts at $FFFFF000 but the .bin file is 8K long meaning the org. is really $FFFFE000. When I try to change the .org to $FFFFE000 there are all zero's. Can someone confirm this?
Not really a huge deal at this point as I can change the reset vector in my hex editor, but something is skewed...

_________________
65Org16:https://github.com/ElEctric-EyE/verilog-6502

My mistake, I forgot. It's 4Kx16. Not 8Kx8. My hex editor confuses me, even though I have it set up to display 16-bit data, it still thinks in terms of 8-bits, so the offsets are wrong. I guess I have no need for the hex editor now...

_________________
65Org16:https://github.com/ElEctric-EyE/verilog-6502

4K of 16 bit bytes = 8K of 8 bit bytes

Edit: Ah I see you got there. Thats the problem with leaving IE open and going off to meetings

_________________
Andrew Jacobs
6502 & PIC Stuff - http://www.obelisk.me.uk/
Cross-Platform 6502/65C02/65816 Macro Assembler - http://www.obelisk.me.uk/dev65/
Open Source Projects - https://github.com/andrew-jacobs

Bitwise, how do we define Labels in your assembler?

Or

You can also have local labels (which can be reused elsewhere) provided they follow a global label

_________________
Andrew Jacobs
6502 & PIC Stuff - http://www.obelisk.me.uk/
Cross-Platform 6502/65C02/65816 Macro Assembler - http://www.obelisk.me.uk/dev65/
Open Source Projects - https://github.com/andrew-jacobs

I've used local labels. I was able to see how you used them in your example boot program. They work as long as they're longer then 1 letter...

But I am trying to do something like:

Looks like you are trying to define some 'equates'. So either

or

No spaces before the symbol name.

_________________
Andrew Jacobs
6502 & PIC Stuff - http://www.obelisk.me.uk/
Cross-Platform 6502/65C02/65816 Macro Assembler - http://www.obelisk.me.uk/dev65/
Open Source Projects - https://github.com/andrew-jacobs

No spaces. That worked...

Your program automatically converts a 6502 program to 65Org16? It sure seems like it does after copying and pasting a short 6502 routine I wrote using MK's assembler.

I built the 65Org16 assembler from the same Java source as my 6502 family assembler. Its uses the same parser but I stripped out support for device switching (.6502, .65C02, .65816) and extended byte to be 16-bits through out.

So if you feed it vanilla 6502 source it will come out as 16-bit code.

_________________
Andrew Jacobs
6502 & PIC Stuff - http://www.obelisk.me.uk/
Cross-Platform 6502/65C02/65816 Macro Assembler - http://www.obelisk.me.uk/dev65/
Open Source Projects - https://github.com/andrew-jacobs

Excellent!

Would it be too much trouble to increase the size of the boot.asm file to 8Kx16? The reason I ask is because I have 3 assemblers/disassemblers I'm looking at, and 2 of the 3 top out at 4Kx8. I'm looking to convert Micromon-64, Supermon-64, and/or Hashmon for my project.

Just change the start address for your code in the source file (e.g. .ORG $FFFFE000) and the linker options to reflect the new code area

_________________
Andrew Jacobs
6502 & PIC Stuff - http://www.obelisk.me.uk/
Cross-Platform 6502/65C02/65816 Macro Assembler - http://www.obelisk.me.uk/dev65/
Open Source Projects - https://github.com/andrew-jacobs

Thanks for the quick reply.
How does one go about changing the linker file/options?
I tried pasting that code in the assembly and it's giving some exceptions.

The linker options are in the makefile

_________________
Andrew Jacobs
6502 & PIC Stuff - http://www.obelisk.me.uk/
Cross-Platform 6502/65C02/65816 Macro Assembler - http://www.obelisk.me.uk/dev65/
Open Source Projects - https://github.com/andrew-jacobs

I see it. Thank You.