6502.org Forum Projects Code Documents Tools Forum
It is currently Sat Sep 28, 2024 8:16 pm

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Previous topic | Next topic 
Author Message
ChuckT
PostPosted: Sat Sep 04, 2010 2:45 am 
Offline

Joined: Wed May 20, 2009 1:06 pm
Posts: 491
Could this product be used with a 65C618 or what would it take to use it with the 65XX line?

http://www.adafruit.com/index.php?main_ ... cts_id=276
Top
 Profile  
Reply with quote  
kc5tja
 Post subject:
PostPosted: Sat Sep 04, 2010 3:08 am 
Offline

Joined: Sat Jan 04, 2003 10:03 pm
Posts: 1706
It should be able to provide more than adequate power. If my math is right, that's a 10W power supply
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Sat Sep 04, 2010 4:43 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8403
Location: Midwestern USA
kc5tja wrote:
It should be able to provide more than adequate power. If my math is right, that's a 10W power supply

Right you are. 10 watts is substantially more than most of our projects will require. My meter says my POC unit draws only 220 MA, which is 1.1 watts. I could run it with some flashlight batteries. This wall wart would be able to run nine POCs and not even work up a sweat. :)

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
6502.org is an ongoing project by Mike Naberezny and contributors.