6502.org Forum Projects Code Documents Tools Forum
It is currently Thu Nov 21, 2024 4:11 pm

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
Martin_H
PostPosted: Fri Jun 14, 2024 11:58 pm 
Offline

Joined: Wed Jan 08, 2014 3:31 pm
Posts: 578
This article is right up this forum's alley:

https://www.nutsvolts.com/magazine/arti ... e_and_well
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Sat Jun 15, 2024 12:33 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8504
Location: Midwestern USA
One thing that didn’t seem to be mentioned in the article, but is critical to attaining reliable connections, is the importance of not touching the bare wire or the wirewrap posts before wrapping.  Skin oils can compromise the connection and, depending on one’s diet, may be slightly acidic, which will eventually cause a loss of integrity.  Garth mentions the importance of cleanliness on his wirewrap page.  Back when I used to wirewrap things, I’d use isopropanol and a cotton swab to clean the posts and wire ends immediately before wrapping.

Quote:
A universal V-notch stripper will nick and weaken or break the wire, and better strippers rarely strip wire that small.

He’s right about the universal stripper—worst damned thing ever invented for electrical work.  I have a quality Klein stripper that goes from 22 AWG to 30 AWG and cleanly strips wirewrap wire.  While I don’t wirewrap anything anymore, I do use that type of wire for bodging PCBs.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
Paganini
PostPosted: Sat Jun 15, 2024 3:00 pm 
Offline

Joined: Fri Mar 18, 2022 6:33 pm
Posts: 491
I have a Klein stripper that manages 30AWG pretty well, but I get the best results with the little brass Radio Shack one that Garth mentions in the Primer.

_________________
"The key is not to let the hardware sense any fear." - Radical Brad
Top
 Profile  
Reply with quote  
barrym95838
PostPosted: Sat Jun 15, 2024 3:22 pm 
Offline
User avatar

Joined: Sun Jun 30, 2013 10:26 pm
Posts: 1949
Location: Sacramento, CA, USA
I haven't tried in many years, but back in my old breadboard days the notch between my two front teeth did a satisfactory job. Not really sure what the effective AWG range was, though.

_________________
Got a kilobyte lying fallow in your 65xx's memory map? Sprinkle some VTL02C on it and see how it grows on you!

Mike B. (about me) (learning how to github)
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Sat Jun 15, 2024 5:34 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8504
Location: Midwestern USA
barrym95838 wrote:
I haven't tried in many years, but back in my old breadboard days the notch between my two front teeth did a satisfactory job.

I think Michael Strahan used to use that technique as well. :D

Quote:
Not really sure what the effective AWG range was, though.

Guess it depends on how hard you bite down.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: barnacle and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.