Just wondered if anyone else is interested in emulating the 6502. Personally, I've been involved in one small emulation project in the past, related to college written in GNU c++...Later.

There is an emulator for the 6502 out there at www.emulator.org (I think) Hope this helps.
A.S.

There are a number of 6502 emulators, hidden in C64 emulators, VIC20 emulators, Apple II emulators etc.

Just grab one.

(The VICE emulator is even GPLd, so follow the links from http://www.6502.org/users/andre)

Andre

_________________
Author of the GeckOS multitasking operating system, the usb65 stack, designer of the Micro-PET and many more 6502 content: http://6502.org/users/andre/

Andre,

You are more familiar with the 6502 emulators than anyone here. Could you be convinced to throw together a simple emulator for the PCB Project? It would need to emulate the 6502, 6522, 16550, and do I/O through a simulated RS-232 dumb terminal.

_________________
- Mike Naberezny (mike@naberezny.com) http://6502.org

Hi Mike,

I was afraid you´d say something like this

[Building a PCB Project emulator]

The problem is I don´t actually have the time to do this, but I´ll see what I can do (maybe I use this as finger-practice for my new cvs knowledge I got
Can´t give a time schedule, though.

Ah, and it´ll only run on Linux, although porting the thing to DOS/Win should after that only be a matter of rewriting some menu files in arch/dos or arch/win in the VICE source (I guess I could use the 6545 emulation for the terminal, so I don´t need to make some custom code

Andre

_________________
Author of the GeckOS multitasking operating system, the usb65 stack, designer of the Micro-PET and many more 6502 content: http://6502.org/users/andre/