6502.org Forum  Projects  Code  Documents  Tools  Forum
It is currently Sat Nov 23, 2024 9:34 am

All times are UTC




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: EhBASIC reference manual
PostPosted: Fri Oct 25, 2013 11:14 am 
Offline

Joined: Sat Jul 28, 2012 11:41 am
Posts: 442
Location: Wiesbaden, Germany
In the past days Lee's website has been offline and therefore access to the EhBASIC documentation was difficult while many coppies of the code already exist. Since I happened to have a snapshot of Lee's EhBASIC website, I compiled all of the documentation on his website into a PDF manual. I then tried to contact Lee through his last known e-mail address and by PM on this forum to seek for approval to publish the manual. This has been unsuccessful so far.

I am publishing this manual now in the hope, that the clear copyright statement in the preface and in the introduction would find Lee's approval anyway.
Attachment:
Enhanced_6502_BASIC_reference_manual.pdf [532.25 KiB]
Downloaded 1129 times
If you find errors in the manual contact me via PM.

_________________
6502 sources on GitHub: https://github.com/Klaus2m5


Top
 Profile  
Reply with quote  
PostPosted: Fri Oct 25, 2013 12:14 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 9:02 pm
Posts: 1748
Location: Sacramento, CA
Nice job Klaus!!

_________________
Please visit my website -> https://sbc.rictor.org/


Top
 Profile  
Reply with quote  
PostPosted: Fri Oct 25, 2013 3:15 pm 
Offline
User avatar

Joined: Sun Jun 30, 2013 10:26 pm
Posts: 1949
Location: Sacramento, CA, USA
I can't speak on behalf of Lee, but I would like to thank you for your attractive preservation effort.

I hope that Lee is okay. I have had a similar experience with VTL-2's author, Frank McCoy. Last summer, he was very kind and responsive, and would sometimes reply to my e-mails in mere minutes. The last update that I sent to him, carrying news of the positive interest generated here, has gone unanswered for many weeks. I know that he had some health issues, and I pray that they didn't get the better of him (Frank).

Take care,

Mike


Top
 Profile  
Reply with quote  
PostPosted: Fri Oct 25, 2013 5:28 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8509
Location: Midwestern USA
Klaus2m5 wrote:
In the past days Lee's website has been offline and therefore access to the EhBASIC documentation was difficult while many coppies of the code already exist. Since I happened to have a snapshot of Lee's EhBASIC website, I compiled all of the documentation on his website into a PDF manual. I then tried to contact Lee through his last known e-mail address and by PM on this forum to seek for approval to publish the manual. This has been unsuccessful so far.

I too had attempted to contact him, with no response. This has me concerned...

Quote:
I am publishing this manual now in the hope, that the clear copyright statement in the preface and in the introduction would find Lee's approval anyway.
Attachment:
Enhanced_6502_BASIC_reference_manual.pdf
If you find errors in the manual contact me via PM.

Good job on this manual. Although I don't have EhBASIC implemented on anything at this time I did archive a copy of your manual here on one of our servers for safe-keeping.

Sometime in the undetermined future, I'm going to see about adapting EhBASIC to my POC series, with an emphasis on taking advantage of the 65C816's enhanced features.

So much to do...so little time in which to do it... :lol:

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!


Top
 Profile  
Reply with quote  
PostPosted: Fri Oct 25, 2013 7:06 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8545
Location: Southern California
I hope he's ok and surfaces! We lost contact with Rob Finch for a few years too, but he's back now. In the mean time, here are some other URLs I've collected for Lee's materials:
http://web.archive.org/web/201209130428 ... index.html
https://github.com/jefftranter/6502/tre ... sm/ehbasic
http://www.applefritter.com/node/6970

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: