6502.org Forum Projects Code Documents Tools Forum
It is currently Sat Sep 21, 2024 3:26 am

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Previous topic | Next topic 
Author Message
fachat
PostPosted: Fri Jun 14, 2024 7:38 am 
Offline

Joined: Tue Jul 05, 2005 7:08 pm
Posts: 1041
Location: near Heidelberg, Germany
I just got an end-of-life notification from mouser for this https://www.mouser.de/ProductDetail/955-W65C22N6TPLG-14

It's the N-version of the 6522, in PLCC package. N-version means that it's electrically compatible with the NMOS 6522.

I understand that anything PLCC is not NMOS by origin - except maybe for my Micro-PET clone where I use PLCC to save board space - so, it's a reasonable decision to set it to end-of-life.
In my Micro-PET I think I can use the S version also.

The DIP-40 N-variant is still available and not end-of-life (yet...): https://www.mouser.de/ProductDetail/Wes ... 22N6TPG-14

André

_________________
Author of the GeckOS multitasking operating system, the usb65 stack, designer of the Micro-PET and many more 6502 content: http://6502.org/users/andre/
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Fri Jun 14, 2024 5:57 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8390
Location: Midwestern USA
fachat wrote:
I just got an end-of-life notification from mouser for this https://www.mouser.de/ProductDetail/955-W65C22N6TPLG-14

Same notification is on the English version of the product page.

Quote:
It's the N-version of the 6522, in PLCC package. N-version means that it's electrically compatible with the NMOS 6522.

On the other hand, the S-version has plenty of stock and no EOL notification.  I'm guessing WDC’s inventory of the most recent run of N-version production is almost depleted, and no more production is planned.

Quote:
In my Micro-PET I think I can use the S version also.

Other than the totem-pole IRQ output, I don’t see any technical issues with using the S-version...and adapting for the totem-pole IRQ is trivial.

One thing in the S-version’s favor is it has the T6 core, which is the same as used with the current versions of the 65C02 and 65C816 (the 6 refers to the 0.6µ geometry).  At least in the 65C02, plasmo has demonstrated that the T6 process can be run in the 30 MHz range.  I wouldn’t be particularly surprised if the 65C22S could run at least in the 20+ MHz range.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
fachat
PostPosted: Mon Jun 17, 2024 10:56 am 
Offline

Joined: Tue Jul 05, 2005 7:08 pm
Posts: 1041
Location: near Heidelberg, Germany
One question that came to my mind - maybe not relevant for most schematics, maybe not even making sense, I didn't look up the details in the datasheet (which I remember are not very good in that aspect):

Could it result in problems when interfacing a 5V W65C22S with a 3.3V CMOS device? I know that driving 5V TTL inputs on devices like 74HCT with a 3.3V CMOS output works, as the min Voh of the CMOS is still over the max Vih of the TTL input. In one of my boards, I drive the address and select lines on a 5V W65C22N from a 3.3V CMOS FPGA, basically relying on what has been long experience (but not fully documented IIRC) about the 6522 inputs (data bus is going through a level converter, as it's bi-directional)

Would that potentially give problems when replacing the N with the S-type 6522?

André

_________________
Author of the GeckOS multitasking operating system, the usb65 stack, designer of the Micro-PET and many more 6502 content: http://6502.org/users/andre/
Top
 Profile  
Reply with quote  
J64C
PostPosted: Mon Jun 17, 2024 11:59 am 
Offline

Joined: Sun Jul 11, 2021 9:12 am
Posts: 155
I can vouch that driving from a 3.3v CPLD to a 5v W65C22 works fine. It’s how I’m doing it in my own board, running at days at a time with no issue at 25MHz.
Top
 Profile  
Reply with quote  
fachat
PostPosted: Mon Jun 17, 2024 12:23 pm 
Offline

Joined: Tue Jul 05, 2005 7:08 pm
Posts: 1041
Location: near Heidelberg, Germany
J64C wrote:
I can vouch that driving from a 3.3v CPLD to a 5v W65C22 works fine. It’s how I’m doing it in my own board, running at days at a time with no issue at 25MHz.


Are you using the S or N variant?

_________________
Author of the GeckOS multitasking operating system, the usb65 stack, designer of the Micro-PET and many more 6502 content: http://6502.org/users/andre/
Top
 Profile  
Reply with quote  
J64C
PostPosted: Mon Jun 17, 2024 11:47 pm 
Offline

Joined: Sun Jul 11, 2021 9:12 am
Posts: 155
Sorry, I forgot to specify. I'm using the 'S' variant.
Top
 Profile  
Reply with quote  
kernelthread
PostPosted: Wed Jun 26, 2024 9:29 pm 
Offline

Joined: Wed Jun 23, 2021 8:02 am
Posts: 166
According to the data sheet, the W65C22N has TTL input thresholds (high >=2V, low <=0.8V) whereas the W65C22S has CMOS thresholds (high >= 0.8VDD, low <= 0.2VDD). That seems like a big difference to me. OK, in reality the threshold for the W65C22S is probably near 0.5VDD, but still significantly different from the W65C22N.
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Thu Jun 27, 2024 1:27 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8390
Location: Midwestern USA
kernelthread wrote:
According to the data sheet, the W65C22N has TTL input thresholds (high >=2V, low <=0.8V) whereas the W65C22S has CMOS thresholds (high >= 0.8VDD, low <= 0.2VDD). That seems like a big difference to me. OK, in reality the threshold for the W65C22S is probably near 0.5VDD, but still significantly different from the W65C22N.

Bill Mensch has said that the input threshold for the WDC microprocessors is at ~50 percent of VCC, which was verified by some testing that Jeff did.  I’d expect the 65C22S would have a similar threshold.  Helping matters is the fact that devices with TTL-compatible outputs can theoretically reach VOH = 3.4 if lightly loaded.  That, of course, easily exceeds the 50 percent level.

In a 65C816 system, more robust operation will be achieved with the use of a data bus transceiver with TTL-compatible inputs, e.g., a 74AHCT245, as depicted in the 65C816 data sheet.  The transceiver will also help to eliminate the risk of bus contention on the rise of the Ø2 clock during a read cycle.  The same transceiver could be used with the 65C02 if there is concern about a device’s output being on the weak side.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
fachat
PostPosted: Thu Jun 27, 2024 4:04 am 
Offline

Joined: Tue Jul 05, 2005 7:08 pm
Posts: 1041
Location: near Heidelberg, Germany
My main concern would be the use of a W65C22 with 5V supply, but the address, select, and control lines being driven by a 3.3V CMOS output.

_________________
Author of the GeckOS multitasking operating system, the usb65 stack, designer of the Micro-PET and many more 6502 content: http://6502.org/users/andre/
Top
 Profile  
Reply with quote  
BigDumbDinosaur
PostPosted: Thu Jun 27, 2024 6:23 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8390
Location: Midwestern USA
fachat wrote:
My main concern would be the use of a W65C22 with 5V supply, but the address, select, and control lines being driven by a 3.3V CMOS output.

Based on what Bill Mensch has said about input thresholds, that would appear to be workable—if you can live with a reduced noise margin and the possibility that parasitic capacitance might give you some timing headaches.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: No registered users and 23 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.