6502.org Forum Projects Code Documents Tools Forum
It is currently Sat Apr 27, 2024 4:51 pm

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 4 of 4
  [ 52 posts ]  Go to page Previous  1, 2, 3, 4
  Previous topic | Next topic 
Author Message
unclouded
PostPosted: Tue Mar 14, 2017 8:53 am 
Offline

Joined: Tue Feb 24, 2015 11:07 pm
Posts: 81
GARTHWILSON wrote:
My apologies. I have not looked into the pricing yet. I still need to do that. I'll look into types with and without the external key.

Hmm. NZ$3.81 for 1 pc from Mouser or NZ$1.72 for 10 pcs from eBay. I'd prefer to use Mouser, but 20x the price is a big difference.
Top
 Profile  
Reply with quote  
GaBuZoMeu
PostPosted: Tue Mar 14, 2017 4:45 pm 
Offline
User avatar

Joined: Wed Mar 01, 2017 8:54 pm
Posts: 660
Location: North-Germany
Perhaps these ones will do
http://nz.mouser.com/ProductDetail/Wurth-Electronics/61301021821/?qs=%2fha2pyFaduhbwb%2fVaKS9H4Vgi0hTYtQ941aoC7rCQrcACdJISxrsmg%3d%3d

They are cheaper :wink:
Top
 Profile  
Reply with quote  
GARTHWILSON
PostPosted: Tue Mar 14, 2017 6:35 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8428
Location: Southern California
I looked into ordering directly from Samtec and I seem to remember the price was quite acceptable (in quantity; the minimum order was pretty high). I don't remember the exact price but I put off ordering for a couple of reasons. I can do it now when I make the time. I have a resale license which probably helps companies take me a little more seriously than they would a hobbyist when I order directly instead of going through a distributor like Mouser; and then I also don't have to pay the sales tax when purchasing (but I have to pay it when I sell to someone in California). That eBay one is a good price except that the shipping is twice what the connectors cost.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
unclouded
PostPosted: Tue Mar 14, 2017 7:48 pm 
Offline

Joined: Tue Feb 24, 2015 11:07 pm
Posts: 81
GaBuZoMeu wrote:
Perhaps these ones will do
http://nz.mouser.com/ProductDetail/Wurth-Electronics/61301021821/?qs=%2fha2pyFaduhbwb%2fVaKS9H4Vgi0hTYtQ941aoC7rCQrcACdJISxrsmg%3d%3d

They are cheaper :wink:

Good find, although those parts don't seem to have the key to guide correct orientation.
Top
 Profile  
Reply with quote  
GARTHWILSON
PostPosted: Tue Mar 14, 2017 7:52 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8428
Location: Southern California
Don't forget that we key the connector by plugging one of the holes in the socket to correspond to the pin that's removed from the pin header. This prevents plugging in backwards, and also prevents plugging in 3.3V parts in to a 5V pin header or vice versa.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
GARTHWILSON
PostPosted: Tue Mar 21, 2017 7:45 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8428
Location: Southern California
I see now that the 3.3V CY15B104Q 512KB FRAM has the same package and pinout as the previously mentioned SPI flash memories, so that will work on the tiny boards too. Advantages are 100,000,000 times as many write cycles' endurance, and writes happen at bus speed, with no need to poll afterward to see if it's done writing, before proceeding with more operations. The disadvantage is the high price (hopefully that will be coming down), and that it does not come in as high of a density (hopefully it will be going up). Note that these are ferroelectric. They are not ferromagnetic, and will not be erased by a magnetic field.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
DerTrueForce
PostPosted: Sun Jul 30, 2017 6:07 am 
Offline

Joined: Sat Jun 04, 2016 10:22 pm
Posts: 483
Location: Australia
Apparently, Cypress makes SPI F-RAMs that work on 5V, too, although they seem to only go up to 32KB, and Mouser only carries them up to 8KB.
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 4 of 4
  [ 52 posts ]  Go to page Previous  1, 2, 3, 4

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: No registered users and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.