6502.org Forum Projects Code Documents Tools Forum
It is currently Fri Nov 22, 2024 11:15 pm

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
GamerFox
 Post subject: Dragon 65c816 SBC
PostPosted: Wed Dec 29, 2021 11:39 pm 
Offline

Joined: Thu Mar 18, 2021 8:11 am
Posts: 28
So, from the design thread in the newbie forum, I refined (mostly by removing things that would only increase complexity for a first-time board) the design. The Dragon v1.0 runs at a 4 MHz clock speed and has:

  • One 65C22 VIA to provide an SPI bus and GPIO
  • DS1305 real-time clock
  • FRAM to hold data not needed in the system ROM (preferences et al)
  • Serial port provided by a MAX3100 and MAX3223
  • MicroSD card slot

The power will be provided by a DC converter board of my own design, mostly so I can use the power supply again and again with later projects.

Future plans include replacing the glue logic ICs with CPLDs and maybe adding a CPLD blitter for display purposes (either a TFT screen or VGA output, haven't decided yet)


Attachments:
File comment: PCB layout
pcb.pdf [397.63 KiB]
Downloaded 67 times
File comment: Schematic
65816-comp.pdf [266.94 KiB]
Downloaded 89 times
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Dragon 65c816 SBC
PostPosted: Thu Dec 30, 2021 12:23 am 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8544
Location: Southern California
Let me recommend running the planes between each pair of pads, for much better AC performance, so signals' ground return current doesn't have to veer away from the signal line and go clear around the end of the IC. There's plenty of room to get it between pads.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
GamerFox
 Post subject: Re: Dragon 65c816 SBC
PostPosted: Thu Dec 30, 2021 5:31 am 
Offline

Joined: Thu Mar 18, 2021 8:11 am
Posts: 28
On both the power and ground planes? (power on page 2, ground on page 3)
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Dragon 65c816 SBC
PostPosted: Thu Dec 30, 2021 5:47 am 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8544
Location: Southern California
At least the ground plane. Since you have traces on layer 4 that cannot "see" the ground plane, and thus are using the power plane as the ground plane, hopefully you have the power plane bypassed to ground at every power pin. Ideally you'd also have it bypassed also everywhere there's a via from layer 1 to layer 4, to keep the return path continuous next to its signal trace; but I've never seen hobbyist boards go to that extent. 74HC logic definitely won't need it. It's easy to run it between pin pads though. See this post: viewtopic.php?f=12&t=6818&p=87925#p87925

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
GamerFox
 Post subject: Re: Dragon 65c816 SBC
PostPosted: Thu Dec 30, 2021 6:53 am 
Offline

Joined: Thu Mar 18, 2021 8:11 am
Posts: 28
Is this different from decoupling caps?
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Dragon 65c816 SBC
PostPosted: Thu Dec 30, 2021 7:14 am 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8544
Location: Southern California
same thing, going from power to ground

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
floobydust
 Post subject: Re: Dragon 65c816 SBC
PostPosted: Thu Dec 30, 2021 2:04 pm 
Offline
User avatar

Joined: Tue Mar 05, 2013 4:31 am
Posts: 1385
Unless I can't find it... I don't see a Reset circuit for the CPU...

_________________
Regards, KM
https://github.com/floobydust
Top
 Profile  
Reply with quote  
GamerFox
 Post subject: Re: Dragon 65c816 SBC
PostPosted: Thu Dec 30, 2021 5:16 pm 
Offline

Joined: Thu Mar 18, 2021 8:11 am
Posts: 28
floobydust wrote:
Unless I can't find it... I don't see a Reset circuit for the CPU...

The reset circuit's on the power board


Attachments:
power.pdf [27 KiB]
Downloaded 48 times
Top
 Profile  
Reply with quote  
GamerFox
 Post subject: Re: Dragon 65c816 SBC
PostPosted: Wed Jan 19, 2022 7:24 pm 
Offline

Joined: Thu Mar 18, 2021 8:11 am
Posts: 28
Here's a new version of the PCB.


Attachments:
boardwork.pdf [362.34 KiB]
Downloaded 61 times
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.