Hi Everyone, I'm a long term 6502 fan in Italy, obviously I had a C64 when I was a child. It's from 2020 that i'm crafting my own 6502 Singleboard/Multiboard computer (later a brief description) I wish to share my latest creation, just in case someone is interested, a DMX output board for 6502 based system. By now it's on breadboard, I'm waiting to receive a PCB from a well known prototype manifacturer.
Here some features: - 2Kb static ram on board - It delivers 512 DMX channels without any charge on the CPU - It has got 3 registers: DMX_ADD_LOW,DMX_ADD_HIGH,DMX_DATA - Interfaces directly on main BUS - needs an 1Mhz clock signal to work properly - 5V power source
Shortly I will post schematics and photos...
just to mention: SittingBull is my 6502 SBC classic layout 6502+6522+32Kb SRam+32Kb EPROM (16Kb used+16Kb i/o address space)+6551UART currently working on: VGA card 640x480sync, 160x120,3Bpp (8 colours) SPI interface SD-CARD reader/writer
_________________ SittingBull
|