6502.org Forum Projects Code Documents Tools Forum
It is currently Sun Nov 24, 2024 5:08 am

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Hardware

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Previous topic | Next topic 
Author Message
kakemoms
 Post subject: Testing 6522 chips
PostPosted: Tue Dec 20, 2016 9:12 pm 
Offline

Joined: Wed Mar 02, 2016 12:00 pm
Posts: 343
Hi

I need to test some 6522 chips and after some discussion I droodled down this schematic:

Attachment:
Tester6522.png
Tester6522.png [ 36.63 KiB | Viewed 1699 times ]


and in monochrome

Attachment:
6522test.PNG
6522test.PNG [ 13.92 KiB | Viewed 1657 times ]


The basic idea is that I want to test its functionality, but also record the waveform of the different outputs to see that the chip is "within spec" or what parts of the chip that is actually such.

If you have any feedback on testing of such chips (or experience) I would like your comments/idea on this.


Last edited by kakemoms on Wed Dec 21, 2016 9:04 am, edited 1 time in total.

Top
 Profile  
Reply with quote  
BigDumbDinosaur
 Post subject: Re: Testing 6522 chips
PostPosted: Wed Dec 21, 2016 5:06 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8514
Location: Midwestern USA
kakemoms wrote:
Hi

I need to test some 6522 chips and after some discussion I droodled down this schematic:

Attachment:
Tester6522.png


The basic idea is that I want to test its functionality, but also record the waveform of the different outputs to see that the chip is "within spec" or what parts of the chip that is actually such.

If you have any feedback on testing of such chips (or experience) I would like your comments/idea on this.

Could you please post that in monochrome?

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
kakemoms
 Post subject: Re: Testing 6522 chips
PostPosted: Wed Dec 21, 2016 9:05 am 
Offline

Joined: Wed Mar 02, 2016 12:00 pm
Posts: 343
BigDumbDinosaur wrote:
Could you please post that in monochrome?


I have added a monochrome version now.
Top
 Profile  
Reply with quote  
BigDumbDinosaur
 Post subject: Re: Testing 6522 chips
PostPosted: Wed Dec 21, 2016 5:10 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8514
Location: Midwestern USA
kakemoms wrote:
Hi

I need to test some 6522 chips and after some discussion I droodled down this schematic...

Reset is floating on the 65C22. You need to pull it up to Vcc or make arrangements to have the Arduino positively drive it, preferably toggle it at power on.

Also, does your Arduino logic observe the requirement that the 65C22's chip selects and R/W be valid before the rise of Ø2?

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Testing 6522 chips
PostPosted: Wed Dec 21, 2016 7:37 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8546
Location: Southern California
I've been careful about anti-static handling precautions, and the only '22 I've seen go bad apparently had a bond wire come loose on one of the I/O lines, making an open circuit. That was on one of our products that we sold from 1994-2007. On the workbench computers and breadboards, I've never seen one go bad, except there was one time many years ago that I accidentally let a screwdriver roll under the main workbench computer while it was powered up, and it shorted a bunch of the wire-wrap pins together and blew something. I never bothered to troubleshoot it. I think I just replaced all the ICs and got going again.

In my first build with a '22 though, I got tripped up by the very thing BDD is saying. The chip selects and R/W have to be valid and stable before Φ2 rises. IOW, you can't use Φ2 to gate the chip selects.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Testing 6522 chips
PostPosted: Wed Dec 21, 2016 7:47 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8546
Location: Southern California
I'm not familiar with the Arduino, but it looks like you have the Φ2 input of the '22 connected to an input on the Arduino. Hopefully that pin can be an output too and you're using it that way.

It would be a good idea also to send a signal to CS2\ rather than just grounding it, to make sure it really works.

Thanks for the monochrome diagram. I don't have color-blindness problems like BDD (I think he said the light green is almost invisible against the white background), but that light-gray writing labeling the pins is awfully hard to read. Eagle apparently allows you to change the colors, but I wrote to them and asked them to supply it with defaults that are easier to see.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
DerTrueForce
 Post subject: Re: Testing 6522 chips
PostPosted: Thu Dec 22, 2016 4:13 am 
Offline

Joined: Sat Jun 04, 2016 10:22 pm
Posts: 483
Location: Australia
I believe that most pins on an Arduino can be used as digital I/Os. I've only ever used a Uno, but the pins marked as analog inputs on that can be individually set to digital inputs or outputs, if required.
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » 6502.org Users Forum » Hardware

All times are UTC


Who is online

Users browsing this forum: Google [Bot] and 52 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.