6502.org Forum Projects Code Documents Tools Forum
It is currently Sat Nov 16, 2024 8:45 pm

View unanswered posts | View active topics


Board index » 6502.org Users Forum » Newbies

All times are UTC




Post new topic Reply to topic  Page 3 of 3
  [ 34 posts ]  Go to page Previous  1, 2, 3
  Previous topic | Next topic 
Author Message
GARTHWILSON
PostPosted: Sun Sep 20, 2015 6:22 am 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8541
Location: Southern California
The dead bus cycles are predictable. In the data sheet (you might have to look at the '816 data sheet to get the info on what happens in every cycle of every addressing mode), it shows dead bus cycles as "IO" for "internal operation." In the case of reset, the 65c02 reset process that it carries out after the RST\ line comes up takes 7 clocks, and it fetches the reset vector in numbers 6 and 7.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
banedon
PostPosted: Sun Sep 20, 2015 9:09 am 
Offline
User avatar

Joined: Sun Sep 08, 2013 10:24 am
Posts: 740
Location: A missile silo somewhere under southern England
beholder wrote:
Hi Banedon.

I figured out why it wasn't working on 115200, the serial window has a dropdown option box where you choose which rate.
Didn't know I had to set the arduino project and the serial window :oops: ....


I find out things this way all the time with electronics :).
Sounds like you're doing well with your project. As Garth says; That boot sequence sounds normal.
I've just booted up my latest creation and it gave:
Code:
Address bus  Data bus  Notes
-----------  --------  -----
$FFFF        $EF       
$FA43        $00       
$01FF        $5F        access the stack/stack initialisation
$01FE        $AF        access the stack/stack initialisation
$01FD        $FD        access the stack/stack initialisation
$FFFC        $00        load LSB of reset vector
$FFFD        $F0        load MSB of reset vector
$F000                   jump to reset vector & start of my main code at $F000
Top
 Profile  
Reply with quote  
Michael
PostPosted: Sun Sep 20, 2015 3:01 pm 
Offline
User avatar

Joined: Wed Feb 13, 2013 1:38 pm
Posts: 589
Location: Michigan, USA
banedon wrote:
I find out things this way all the time with electronics :).
Sounds like you're doing well with your project. As Garth says; That boot sequence sounds normal.
I've just booted up my latest creation and it gave:
Code:
Address bus  Data bus  Notes
-----------  --------  -----
$FFFF        $EF       
$FA43        $00       
$01FF        $5F        access the stack/stack initialisation
$01FE        $AF        access the stack/stack initialisation
$01FD        $FD        access the stack/stack initialisation
$FFFC        $00        load LSB of reset vector
$FFFD        $F0        load MSB of reset vector
$F000                   jump to reset vector & start of my main code at $F000

Which CPU are you using? Rockwell 65C02, WDC 65C02, or WDC 65C816?
Top
 Profile  
Reply with quote  
banedon
PostPosted: Mon Sep 21, 2015 11:34 am 
Offline
User avatar

Joined: Sun Sep 08, 2013 10:24 am
Posts: 740
Location: A missile silo somewhere under southern England
Michael wrote:
banedon wrote:
I find out things this way all the time with electronics :).
Sounds like you're doing well with your project. As Garth says; That boot sequence sounds normal.
I've just booted up my latest creation and it gave:
Code:
Address bus  Data bus  Notes
-----------  --------  -----
$FFFF        $EF       
$FA43        $00       
$01FF        $5F        access the stack/stack initialisation
$01FE        $AF        access the stack/stack initialisation
$01FD        $FD        access the stack/stack initialisation
$FFFC        $00        load LSB of reset vector
$FFFD        $F0        load MSB of reset vector
$F000                   jump to reset vector & start of my main code at $F000

Which CPU are you using? Rockwell 65C02, WDC 65C02, or WDC 65C816?

Mine is a WDC W65C02S. I think beholder's one is, too.
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 3 of 3
  [ 34 posts ]  Go to page Previous  1, 2, 3

Board index » 6502.org Users Forum » Newbies

All times are UTC


Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
6502.org is an ongoing project by Mike Naberezny and contributors.