6502.org Forum  Projects  Code  Documents  Tools  Forum
It is currently Sun Nov 10, 2024 10:58 pm

All times are UTC




Post new topic Reply to topic  [ 22 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: My first computer
PostPosted: Sat Jul 11, 2015 7:58 am 
Offline
User avatar

Joined: Tue Feb 10, 2015 5:27 pm
Posts: 80
Location: Germany
As I have to move soon, things are on hold now. :-/

GARTHWILSON wrote:
The CMOS one is definitely the better one.

Overall you are probably right - but looking into nostalgia NMOS is the choice, and also in seeking some challenge w/ undocumented instructions.


Top
 Profile  
Reply with quote  
 Post subject: Re: My first computer
PostPosted: Sat Jul 11, 2015 8:09 am 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8539
Location: Southern California
The CMOS replaced the illegal NMOS op codes with more useful added instructions and addressing modes, and still leaves some illegal op codes which can be exploited for fast (single-cycle) I/O. But true, if you want to run legacy software that was written for the early NMOS machines using the NMOS illegal op codes, you'll have to use NMOS. I'm rounding up all the NMOS-CMOS differences now to put in a web page. There are lots, both hardware and software.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?


Top
 Profile  
Reply with quote  
 Post subject: Re: My first computer
PostPosted: Tue Jul 14, 2015 9:03 am 
Offline
User avatar

Joined: Tue Feb 10, 2015 5:27 pm
Posts: 80
Location: Germany
Ok... soldering gun is fixed.

Today 2xCIA 6526 and 1xVIC 8565 arrived. I got them cheap on ebay, but have no clue yet if the are operational at all.


Top
 Profile  
Reply with quote  
 Post subject: Re: My first computer
PostPosted: Tue Jul 14, 2015 4:35 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8481
Location: Midwestern USA
Hobbit1972 wrote:
Ok... soldering gun is fixed.

Today 2xCIA 6526 and 1xVIC 8565 arrived. I got them cheap on ebay, but have no clue yet if the are operational at all.

Soldering gun? Isn't that a bit brutal for working with chips? :?:

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!


Top
 Profile  
Reply with quote  
 Post subject: Re: My first computer
PostPosted: Tue Jul 14, 2015 5:35 pm 
Offline
User avatar

Joined: Tue Feb 10, 2015 5:27 pm
Posts: 80
Location: Germany
BigDumbDinosaur wrote:
Soldering gun? Isn't that a bit brutal for working with chips? :?:


:mrgreen: Non-native speaker (or writer) mixing up things... does "soldering iron" sound better and less brutal?


Top
 Profile  
Reply with quote  
 Post subject: Re: My first computer
PostPosted: Tue Jul 14, 2015 7:55 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8481
Location: Midwestern USA
Hobbit1972 wrote:
BigDumbDinosaur wrote:
Soldering gun? Isn't that a bit brutal for working with chips? :?:

:mrgreen: Non-native speaker (or writer) mixing up things... does "soldering iron" sound better and less brutal?

Yes. :lol: I see "soldering gun" and I visualize the 125 watt one that I use for machinery repair purposes. If I were to use it to solder chips to a PCB it would be akin to swatting flies with a sledge hammer. :lol:

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!


Top
 Profile  
Reply with quote  
 Post subject: Re: My first computer
PostPosted: Wed Feb 10, 2016 4:54 pm 
Offline
User avatar

Joined: Tue Feb 10, 2015 5:27 pm
Posts: 80
Location: Germany
*yuck*

Moving from one place to another is poisonous for such things....

Just to let you know, I had to move last year, and will have to move soon again. So my SBC-project is on hold :-/


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ]  Go to page Previous  1, 2

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: