6502.org Forum  Projects  Code  Documents  Tools  Forum
It is currently Thu Mar 28, 2024 5:18 pm

All times are UTC




Post new topic Reply to topic  [ 672 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 45  Next
Author Message
 Post subject:
PostPosted: Wed Nov 16, 2011 4:37 pm 
Offline

Joined: Wed Nov 16, 2011 9:39 am
Posts: 11
Hi guys!

I repost this, hopefully in the right section now ;)

My name is Johan Fransson, living in Sweden. I am a 35-year old engineer working with software development. Since my early teens I have always been interested in computers and also computer music. As for 8-bit technology, I have owned a Commodore 64 on which I created some programs but mostly used it to listen to SID music :)

Years have gone by and I have developed my musical interest, creating stuff on my own using various sequencer software. Also during the last 5-10 years I have become interested in photography (mostly people).

The 8-bit nostalgia has struck me in a hard way the last couple of years. Not only is my music getting more and more SID-like sounds, but I recently found out via a friend about the advancement in microcontroller technology and the community around it. I ordered an Arduino and Gameduino and some Sparkfun parts to create an retro arcade style game. It takes some time and a lot of programming, but the project progresses.

So I accidentally stumbled upon this forum a few months ago and saw the light. I couldn't believe it. There is actually a community about regular microprocessors, not just microcontrollers. Finally, a possibility to fulfil an old dream; build my own computer! I have lurked about for some time and realized the amount of knowledge here and for that I salute you guys! It seems it will not be impossible to build something from scratch with this kind of community.

So here I am. I have a WDC 65C02, a WDC 65C22, some RAM and EEPROM and other logic and a big breadboard on order. I am planning on building something simple, firstly with some leds and maybe a button, then maybe later on trying to use the timer in the 65C22 for sound.

Once again, thanks for a great forum, and hopefully I will be able to contribute in the future :) For now, I will probably just be the new guy asking questions :)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed Nov 16, 2011 5:14 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8114
Location: Midwestern USA
JohanFr wrote:
My name is Johan Fransson...For now, I will probably just be the new guy asking questions :)

Welcome to our little 8 (and 16) bit world. We were all new guys at one time, except maybe Garth Wilson, who I believe was born in a nursery next door to the 6502.org server. :lol:

Anyhow, don't be shy about asking questions. We're never shy about offering answers.

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed Nov 16, 2011 5:40 pm 
Offline

Joined: Fri Jun 27, 2003 8:12 am
Posts: 618
Location: Meadowbrook
And if we don't have an answer, at least we have an opinion!

_________________
"My biggest dream in life? Building black plywood Habitrails"


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Nov 20, 2011 8:26 pm 
Offline

Joined: Sun Nov 20, 2011 8:09 pm
Posts: 1
-


Last edited by WimTibackx on Sun Dec 15, 2019 2:50 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Nov 20, 2011 8:43 pm 
Offline
User avatar

Joined: Thu Dec 11, 2008 1:28 pm
Posts: 10760
Location: England
Welcome! Fascinated by computers is an excellent starting point! And open source activity sounds good too.

We've got lots of software threads as well as hardware.

It's good to hear about 6502 being used in a teaching context (not so long ago I found Visual6502 linked to in some computer architecture course materials)

Cheers
Ed


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Nov 21, 2011 10:44 am 
Offline

Joined: Thu Jul 22, 2004 11:46 am
Posts: 43
Location: Sweden
Hej Johan,
Kul att se nån svensk till här på forumet =)
Anyway, welcome here. It really is great to see that the forum continues to draw new members.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Dec 16, 2011 6:54 pm 
Offline

Joined: Fri Dec 16, 2011 6:40 pm
Posts: 1
Hi, I'm 3GenGames, or Aaron, or 3Gen, or 3g, or whatever you want to call me. I'm 17, from Ohio in the US, and am a 6502 and 6809 programmer. I like 6809 better but program 6502 far more often since I work on NES programs. I don't really have many out right now but if you'd like to see some programs of mine just ask. I'm just here to lurk and maybe post once in a while. There's not much of 6502 that I haven't done as of now so I doubt I'd ever need help. Nice to be here.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Dec 17, 2011 12:04 am 
Offline
User avatar

Joined: Mon Aug 08, 2011 2:48 pm
Posts: 808
Location: Croatia
Welcome to the community, i think you might find lots of interesting conversations on this forum.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Dec 20, 2011 7:15 am 
Offline

Joined: Thu Jul 08, 2010 12:53 pm
Posts: 3
Hi everyone,

after being there for long time, i introduce myself a little bit late, sorry :?

I'm Nicolas, 44 years old, French (nobody's perfect) the first computer which received my fingers was an Apple II, first shock, and i still love that computer, so i learned Basic and assembly on it, and became a computer scientist.

Now i try to make some simulator's programs, or assembler for the 6502/65c02 (i'm using "PureBasic" language).

I'm also trying to understand electronic to use some 6502 on a bread board :wink:

Wish you a good day folks :D


Top
 Profile  
Reply with quote  
 Post subject: Introduce yourself
PostPosted: Sun Jan 08, 2012 8:35 am 
Offline
User avatar

Joined: Wed Jan 04, 2012 4:28 am
Posts: 31
Location: Florida
Wow! So many impressive biographies here, I am not sure I should post my humble self.
Well, I want to introduce myself before I start posting on this forum, so here goes.
I was born... no, I am just kidding ;-). I will start a bit later:
My interest in computers started around the time I was at 7th grade (elementary school in Poland was 8 grade at the time). Unfortunately, to own a computer in 1982-83 in Poland was not that easy. First of all, the home computer industry in Poland was non-existent. Socialistic economy did not create good environment for creating commercial opportunities for merchants either (hence it was close to impossible to buy western technology in Polish local electronic store). Therefore all the personal computers were privately imported and sold on the flea market in the capital city of Warsaw. To own Commodore 64 with 1541 drive, you had to pay 300,000 zloty cash. My father's 10 year salary. ZX Spectrum was 120,000. ZX 81 - 10,000. I was young and enthusiastic, but I understood that I had no chance of acquiring my own hardware at the time. Therefore I pursued my interest on the abstract level and started to collect as much literature as I could to learn about computers and programming in BASIC. By the time I was in 4th grade at high school, I had access to Commodore 64 and Plus 4. I was the only one in class that knew what is that beast called personal or home computer and I could key in simple BASIC program to the computer just from the top of my head (calculator with 4 operations) which worked. This impressed my electronics class teacher (I went to technical grade high school). I was pronounced the head of the computer club at school. I still did not know at the time how the microprocessor worked. I did not even care what kind of CPU was inside C64. I just wanted to program them computers in high level languages like BASIC, Logo, Forth or Pascal. I wanted to create beautiful structurally written programs that would perform calculations, manage data bases or play games.
I graduated from high school. My final thesis was a program for Commodore Plus 4 written in BASIC - a catalog of 74 series IC-s. Then I went to work as a communications company technician and my computer interest was put aside for about 2 years. After 2 years I went to technical university and started graduate program to become electrical engineer. I later took specialization in automatic control and computer science. At college I learned about micro controllers, had access to my 1st PC compatible computers and learned programming in Pascal, LISP and C. The micro controllers class and learning about 8051 got me interested in the idea of building my own computer. Some of my friends built their own SBC-s with 8051 micro controller identical to the one we used in class to help them in their studies. Due to my genetically inherited laziness, I did not pursue similar interests (too much effort) and I remained on abstract level using Keil software suite (they had excellent emulator) to emulate any imaginary hardware based on 8051 uC and wrote programs to control it. I remember my final project was a clock with 100 year calendar running on our 8051 development board. Teacher tested it thoroughly against idiot-proof requirements and such and it passed with flying colors. Another idea I had was 8051 controlled room lighting conditions adjusting unit. It would either close or open electric motor controlled windows blinds and also regulate the electric lighting in the room to keep optimal lighting conditions. All in simulator, never built any hardware model or prototype (but one day I will). I was proud to be at the top of the micro controller class. For the reasons unknown to me, most of my peers hated the subject.
I could not afford my own PC while in college, but, lo and behold, local electronic store in my town was still selling new Commodore 64 computers in 1992. I bought one with datasette unit (they did not carry 1541s). This is when my obsession with 6502 really took off. By the end of 1995 I was programming in machine code and Forth and building some electronic toys attached to C64's ports (mostly blinking lights, 7-segment displays and such stuff).
Due to multiple things happening in my life at the time, like university graduation, marriage, new job, then travel to U.S.A. to pursue career opportunities, I did not have much time any more for any time consuming hobbies. I boxed my C64 (at the time I started to work I could afford a PC, as well as I bought 2 second hand commodore disk drives) and electronic junk, stored at my wife's mother place in closet and prepared to leave for U.S.A. Here I work as a computer programmer for health care industry. The software we write is heavily controlled by FDA regulations and mostly DB management (Yaaawn! Booring!). Some time in the middle of 2000-s I got interested in robot building with 2 of my workmates and we bought iRobot Create and Qwerk hobby platforms but we lacked any good ideas for the robot. My friends lost interest soon and I am now in possession of a robot, or rather useless good for nothing monstrosity I call Sir Terk Bot. I play with it from time to time, try to teach it how to follow object or a line, simple non-innovative stuff really, just for fun. I guess I lack the talent for innovation. Oh well. What was interesting about qwerk controller was that it was a self contained ARM based Linux computer with all the servo, motor and A/D electronic already on board. Very convenient. The software actually runs on the PC (there are JAVA, C++ and C# API-s in existence) and controls the robot over the network (WiFi connectivity is available with attached USB dongle). The qwerk controller is now outdated, out of stock and not supported. They have something new in store to replace it. If you don't know about the project but are interested, explore this: http://www.terk.ri.cmu.edu/
It was the last year when 8-bit computing nostalgia hit me hard. I started to browse internet a lot about retro computers, following e-bay auctions of Commodore and Apple computers and old PC compatible DOS machines. I started to miss these simpler and filled with enthusiasm times. This is when I decided that I will start my new hobby, the computer/micro controller hardware and software building hobby. At that time I decided I would one day build my own 8-bit computer system. Something that I believe I would achieve much earlier when I was born and taken education at a different country than my motherland and perhaps at a little earlier time.
So, I started my 8051 based project then, as a warm up (to improve my soldering iron wielding skills), which is now finished. You can read about it here: http://6502cpu.blogspot.com/2012/01/805 ... ssage.html
Then we went to visit Poland on summer of 2011. When we visited my wife's mother I unboxed my Commodore computers (I have 2 C64C units), datasette units and disk drives (1541 and 1571). I decided to take them back to US and start using them in my hobby projects. Back in U.S. I bought power adapter and composite to VGA PAL-NTSC converter to use my European Commodore hardware here. It worked. In the meantime one of the drives (1541) broke when I was playing with my 1541XA cable. I bought 3 old 1541s off e-bay, swapped electronics from good one to broken one, did some calibrating on the old clunkers drive mechanisms and I have now one 1541 hooked to a PC computer, 2 more with my C64 and one spare. What a great system it was. I still like to fire it up, load turbo assembler and write programs just on the real hardware, have this awesome look and feel experience with C64, that no emulator can reproduce.
At the end of 2011/beginning of 2012 my new project finally takes shape - 6502 based 8-bit computer. You can read about it here:
http://6502cpu.blogspot.com/2012/01/650 ... n-and.html
and this is where I am now. Husband and dad in his early 40-s that had awaken the inner child within himself.
Thank you for reading. See you in the forum's discussion threads. I am going to stay here for a while.

_________________
Marek Karcz
---
"Don't worry. We've got our best people working on it."


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Jan 08, 2012 10:01 am 
Offline
User avatar

Joined: Thu Dec 11, 2008 1:28 pm
Posts: 10760
Location: England
Excellent! Welcome, and look forward to hearing more from you.
Cheers
Ed


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Jan 09, 2012 9:43 am 
Offline
User avatar

Joined: Thu Dec 11, 2008 1:28 pm
Posts: 10760
Location: England
(Oh, and welcome also to flaith! You didn't write such a long story, but it's always good to have background.)


Top
 Profile  
Reply with quote  
 Post subject: Re: Introduce yourself
PostPosted: Wed Jan 25, 2012 11:17 am 
Offline
User avatar

Joined: Tue Sep 11, 2007 8:48 am
Posts: 27
Location: Pruszków/Poland
mkarcz wrote:
Therefore all the personal computers were privately imported and sold on the flea market in the capital city of Warsaw.
[...]
This impressed my electronics class teacher (I went to technical grade high school).


Yeah... still remember the "Grzyb" (that flea market at Grzybowska st.)... That was the only place where I could see the 1581 in real life :P

What high school and university did you attend ?

_________________
Practice safe HEX !


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Jan 28, 2012 7:52 am 
Offline
User avatar

Joined: Wed Jan 04, 2012 4:28 am
Posts: 31
Location: Florida
Hello Konrad,

Nice to meet a fellow Pole here.
I come from small town in S.E. Poland in what was at the time Przemyskie District and today is in Podkarpackie District. Town name is Przeworsk and this is where I attended high school (Technikum Elektryczne or Electrical Technical High School for our English speaking friends) from 1985 to 1989. Technical high schools were 5-years long at that time, but I started at grade 2 as I moved from Krakow, where I attended a different school for just one year (Railroads Technical School). They even have a web site these days: http://www.zsz.boo.pl/ (can you imagine? :-)). I later attended and graduated with Masters Degree from Technical University in Rzeszow as Electrical Engineer with Automation and Information Science specialization in 1996 and immediately started working in software company. I was not a brilliant student, but I loved computers and programming since elementary school. I have never visited Grzybowska Flea Market in Warsaw, I just read about it (and followed computer hardware prices) in computer press (Komputer, Bajtek).
Can I ask where do you come from in Poland?

_________________
Marek Karcz
---
"Don't worry. We've got our best people working on it."


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed Feb 01, 2012 11:12 am 
Offline
User avatar

Joined: Tue Sep 11, 2007 8:48 am
Posts: 27
Location: Pruszków/Poland
mkarcz wrote:
Hello Konrad,

[...]

I have never visited Grzybowska Flea Market in Warsaw, I just read about it (and followed computer hardware prices) in computer press (Komputer, Bajtek).
Can I ask where do you come from in Poland?


Warsaw... And when I finally could afford a computer (i.e. C64) - they were available in some shops. My parents bought me a C64 in Dec '89 or Jan '90 - when I was in the first class of the secondary school (technical one, just like you).

Grzybowska was still the most important computer flea market at that time. But I was rather visiting "Wolumen" - the biggest IC & electronics flea market in Poland. Finding a 6502 or 6522 was a challenge though - Poland was "Z80 & 8051 only" back then :P

_________________
Practice safe HEX !


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 672 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 45  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: