6502.org Forum  Projects  Code  Documents  Tools  Forum
It is currently Fri Nov 15, 2024 8:53 pm

All times are UTC




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: A new guy here.
PostPosted: Wed Oct 08, 2003 1:43 am 
Offline

Joined: Wed Oct 08, 2003 1:15 am
Posts: 25
Location: Florida
Hi there,
just wanted to drop a note. I have been using 6502 & 65C02 varieties for almost 20 years, on and off. Started with Synertek bare board computer, enjoyed it immensely. I like to develop gadgets using 65xx that I sell to industry, mainly sonar type instruments. I used to buy 65xx in quantity directly from GTE, then California Micro Devices (CMD), but since they had stopped making it, I thought I was in trouble. I didn't think WDC would be selling actual chips, so contacted Mike Naberezny first. Yesterday, I purchased 150 of 65C02 from WDC, this will last a few years. I have bought enough (300 pc) CMD's G65SC22 from Arrow, they have thousands of them, but none 65C02. All sold out.
I hope WDC will continue to supply this micro for a long time, if not, I will have to look for a different microprocessor. I have been using Microchip for small products, so probably I would consider these first.
To my surprise, I have discovered today a web site dedicated to C compiler for 65xx. Here is the link:
http://www.cc65.org/#Tools
Hope the link works, if not, delete the #tools and try again. I do not use C (know nothing about it), I am confortable with assembly, have a better control of timing.
Good luck to you all,
Icy


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed Oct 08, 2003 2:37 pm 
Offline

Joined: Sat Jan 04, 2003 10:03 pm
Posts: 1706
Welcome. :)

I'm not exactly new here, of course, but I am starting a new venture. I'm trying to establish an electronics kit manufacturing business. (I laugh whenever I see "Kit" and "Manufacturing" in the same sentence, but I digress!) I'm hoping a number of my future products will be based on the 65C816 microprocessor.

That being said, I haven't seen anything indicating that WDC will stop selling discrete components anytime too soon. They've obviously been selling in large enough numbers that they're still on the market today (well, except the 65C802). Maybe they're not as cheap as they could be (~$6 for a 65816 when a higher performance CPU like the 68010 costs about the same, in units of one), but at least they're available. And for that, I'm thankful. While I love the 68010 microprocessor, I feel the 65816 is easier to use (comparable performance with an 8-bit data bus and only single cycle memory cycle is compelling) in a circuit built with a limited budget.


Top
 Profile  
Reply with quote  
PostPosted: Thu Oct 09, 2003 1:54 am 
Offline

Joined: Wed Oct 08, 2003 1:15 am
Posts: 25
Location: Florida
Thanks for the welcome and for assurance that WDC intends to keep making their products. I would like to believe that. However, we need to be cautious. For example, I called California Micro Devices last year to ask if they had any plans to phase out their G65SCxx in future. The answer: "not at all, as long as they are selling, we'll keep making them." Less than a year later, they have canned the chips.
The rationale from this experience might be that we should maintain enough chips in our posession for at least one year. We should not deplete our stock to point where we need to buy 65xx in a hurry, as was my case.
I agree that price ~$6 for a 65816 is not excessive, in fact it is quite inexpensive by comparison. The same goes for the Motorola micro you mentioned. For example, tiny Microchip 8-bit microcontrollers with 2K program memory sell for that much. From what I have experienced, the cost of microprocessors is not important when it is used in a marketable product. The microprocessor cost is only a tiny, insignificant fraction of the product selling price.

By the way, the link I have posted in my previous message has been posted on this site for a long time, I appologize for my oversight.
Cheers!
Icy


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Oct 09, 2003 4:07 am 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8541
Location: Southern California
There's a big difference though. CMD has loads of other products. The 65 family was just a small percentage of everything they discontinued last year. In contrast, the 65 family is WDC's entire business. Their business does not seem to be declining either, since they're saying that now at over 200,000,000 65c02 cores per year going into products, it's more than at any previous time in history. So will they continue selling parts and not just licensing IP (intellectual property)? I expect they will, since it helps potential IP customers evaluate the IP. What if Bill Mensch decides to retire? (not that I've heard any rumors like that though). I'm sure the business will continue with whoever inherits or buys it. Will the new party be as successful and be able to keep it going indefinitely? That's where I'm not quite as confident. Implementing the parts in programmable logic is becoming easier each year though. I don't think the technology will ever become unavailable.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Oct 10, 2003 2:32 pm 
Offline

Joined: Sat Jan 04, 2003 10:03 pm
Posts: 1706
GARTHWILSON wrote:
So will they continue selling parts and not just licensing IP (intellectual property)?


Yes, IP in this context stands for Intellectual Property, not Internet Packet. :D


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Oct 10, 2003 7:08 pm 
Offline

Joined: Wed Sep 04, 2002 4:08 pm
Posts: 57
Location: Iowa
Internet Protocol? :)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Oct 11, 2003 3:24 am 
Offline

Joined: Sat Jan 04, 2003 10:03 pm
Posts: 1706
schidester wrote:
Internet Protocol? :)


That's what I meant. Thanks.


Top
 Profile  
Reply with quote  
 Post subject: download cc65 here
PostPosted: Thu Nov 20, 2003 3:26 am 
Offline

Joined: Thu Nov 20, 2003 2:42 am
Posts: 3
http://www.funet.fi/pub/cbm/programming/cc65/


Last edited by lcdytd on Thu Nov 20, 2003 3:37 am, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject: ftp to download cc65
PostPosted: Thu Nov 20, 2003 3:34 am 
Offline

Joined: Thu Nov 20, 2003 2:42 am
Posts: 3
ftp://ftp.funet.fi/pub/cbm/programming/cc65/


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: