6502.org Forum Projects Code Documents Tools Forum
It is currently Sat Nov 23, 2024 1:35 pm

View unanswered posts | View active topics


Board index » 6502.org Users Forum » General Discussions

All times are UTC




Post new topic Reply to topic  Page 2 of 4
  [ 53 posts ]  Go to page Previous  1, 2, 3, 4  Next
  Previous topic | Next topic 
Author Message
Nightmaretony
 Post subject: Re: Cheap PCB stories...
PostPosted: Fri Jun 08, 2012 6:34 pm 
Offline

Joined: Fri Jun 27, 2003 8:12 am
Posts: 618
Location: Meadowbrook
http://www.nightmarepark.com/6502/Pinba ... tuffed.jpg

20 made for prototypes, ultimatepcb.com. They messed up on the 2 logos on the upper right but the rest of the silkscreen and board appear ok.
my total cost including shipping was 420.

cost for 100 of them would be at 7.50 each, excluding setups and shipping from china.

the silkscreen issue gives me pause. I check my gerbers and they were fine.

am needing to learn CPLDs to program the main one, so I cant do electrical full testing until I get the central thing set up...

_________________
"My biggest dream in life? Building black plywood Habitrails"
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Cheap PCB stories...
PostPosted: Fri Jun 08, 2012 8:42 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8545
Location: Southern California
Quote:
They messed up on the 2 logos on the upper right [...] the silkscreen issue gives me pause. I check my gerbers and they were fine.

I use Gerbv gerber-viewer software to see the completed gerbers, and take screenshots and include them with the files when I email, to help eliminate any doubt.  If you use Ubuntu Linux, it's available for one-click download and installation in the Ubuntu software center.  Edit, 12/1/16: I see there's a free 3D online gerber viewer at http://mayhewlabs.com/3dpcb .

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
Nightmaretony
 Post subject: Re: Cheap PCB stories...
PostPosted: Fri Jun 08, 2012 9:44 pm 
Offline

Joined: Fri Jun 27, 2003 8:12 am
Posts: 618
Location: Meadowbrook
windows xp over here, I will take screenshots for the next time round. I did and sent to them about the error.

_________________
"My biggest dream in life? Building black plywood Habitrails"
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Cheap PCB stories...
PostPosted: Fri Jun 08, 2012 11:21 pm 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8545
Location: Southern California
I probably should have mentioned (in case it wasn't obvious) that my reason for using the gerber viewer was so they couldn't pass the buck and blame my CAD.  If the independent gerber viewer software confirmed that the CAD output was what I wanted, it takes away any argument they might have against doing it again free if they messed up.  If I just took screenshots from the CAD itself, it would not pack the punch of proof.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
Nightmaretony
 Post subject: Re: Cheap PCB stories...
PostPosted: Sat Jun 09, 2012 12:27 am 
Offline

Joined: Fri Jun 27, 2003 8:12 am
Posts: 618
Location: Meadowbrook
:)

from now on, will scrennshot all layers to add in with it....

_________________
"My biggest dream in life? Building black plywood Habitrails"
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Cheap PCB stories...
PostPosted: Sat Jun 09, 2012 1:09 am 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8545
Location: Southern California
May not be a bad idea, but I usually just do a couple of combinations of layers to show key things, then they can see how they line up also.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
BillO
 Post subject: Re: Cheap PCB stories...
PostPosted: Sat Jun 09, 2012 1:11 am 
Offline
User avatar

Joined: Fri Dec 12, 2008 10:40 pm
Posts: 1007
Location: Canada
Since my last post on this topic I have discovered a new supplier: http://www.sitopway.com

I do a lot of business with them. The previous guy's, while priced well, do not seem to be very responsive. They also do not do assembly or supply components.

In fact, these guy's are so good, I've begun to base my pricing on their quotes and charges. This now has me worried as I can't find an alternative supplier that can provide the same quality as the same price. Yikes! I'm just nervous having a sole source.

Anyway, they recently blew me away by providing a low volume prototype service on this:
Attachment:
OMS AVD ABU.jpg
OMS AVD ABU.jpg [ 150.23 KiB | Viewed 5111 times ]


The quote was for 5 units, all parts supplied and soldered (as you see it) and shipped to me in Canada was $158USD. That's just $31.60 a board! The picture is proof I went for it.

If you need either low, medium or high volume turnkey production, these guy's are great. Use them if you can and keep them in business for me. :wink:

_________________
Bill
Top
 Profile  
Reply with quote  
BigDumbDinosaur
 Post subject: Re: Cheap PCB stories...
PostPosted: Sat Jun 09, 2012 1:19 am 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8509
Location: Midwestern USA
BillO wrote:
Since my last post on this topic I have discovered a new supplier: [url]http://www.sitopway.com[/url]...Anyway, they recently blew me away by providing a low volume prototype service on this:
Attachment:
OMS AVD ABU.jpg

Cool! And in red, no less. What does this device do?

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
BillO
 Post subject: Re: Cheap PCB stories...
PostPosted: Sat Jun 09, 2012 1:48 am 
Offline
User avatar

Joined: Fri Dec 12, 2008 10:40 pm
Posts: 1007
Location: Canada
BigDumbDinosaur wrote:

Cool! And in red, no less. What does this device do?


The full explanation would take several pages, but in the end it's a simple microcontroller development board for use with ATmegaXX8 MCUs. It was commissioned by a university that wanted something the students would be interested in and to teach the concepts of modular (repeatable, rapid and reliable) design. So to achieve that goal, it is compatible with Arduino shields and with 3-wire modules. The ZIF socket is there so that the students need only buy an MCU or two for their needs and the university will have a bunch of the boards around for the students to share. The student can use a ATmega328 with an Arduino bootloader on it and use the Arduino IDE, or if they wish, it has a standard ICSP header if they want to use a different software platform. Apparently though, all the students are Arduino nuts.

This is a prototype. Several changes have been made for the production model (due in 2 weeks) that add functionality and increase versatility, which was a key concern for the university.

The red color was specified by the client. The university thought it would be easier to detect students palming them and hence somewhat abate attrition. I suggested they go with yellow, as I felt no one would want one.

_________________
Bill
Top
 Profile  
Reply with quote  
BigDumbDinosaur
 Post subject: Re: Cheap PCB stories...
PostPosted: Wed Jun 27, 2012 10:06 pm 
Offline
User avatar

Joined: Thu May 28, 2009 9:46 pm
Posts: 8509
Location: Midwestern USA
BillO wrote:
BigDumbDinosaur wrote:
Cool! And in red, no less. What does this device do?

The full explanation would take several pages...The red color was specified by the client. The university thought it would be easier to detect students palming them and hence somewhat abate attrition. I suggested they go with yellow, as I felt no one would want one.

Since the PCB is Canadian Red, perhaps you should include a maple leaf in the artwork right next to "Engineered in Canada." Dunno if that's even possible but it would be really ultracool!

_________________
x86?  We ain't got no x86.  We don't NEED no stinking x86!
Top
 Profile  
Reply with quote  
BillO
 Post subject: Re: Cheap PCB stories...
PostPosted: Thu Jun 28, 2012 3:29 pm 
Offline
User avatar

Joined: Fri Dec 12, 2008 10:40 pm
Posts: 1007
Location: Canada
BigDumbDinosaur wrote:

Since the PCB is Canadian Red, perhaps you should include a maple leaf in the artwork right next to "Engineered in Canada." Dunno if that's even possible but it would be really ultracool!


I guess I could create a custom pattern in the shape of a flag. Sounds like a cool idea. Thanks!

_________________
Bill
Top
 Profile  
Reply with quote  
Aslak3
 Post subject: Re: Cheap PCB stories...
PostPosted: Mon Dec 15, 2014 9:49 pm 
Offline

Joined: Mon Aug 05, 2013 10:43 pm
Posts: 258
Location: Southampton, UK
The topic of PCB makers came up in the Hardware forum, so I wanted to share my thoughts.

I've used Botechcircuis (http://www.botechcircuits.com/). The website is complete rubbish, however they are very good and I would recommend them. It's a small Chinese firm, and I'm guessing nearly all the business comes through ebay, eg:

http://www.ebay.co.uk/itm/170919488688

Prices are $30 for 10 of 10cm x 10cm dual layer board, tolerances down to 6mil. $20 for DHL international shipping. 4 layer boards (which I've not used myself) are $89 at the same size. The boards seem to be of good quality, and of course, if you need less boards but bigger boards, the price goes up more slowly. eg. 5 of 142mm x 125mm was $55 + $20 shipping for me back in Arpil. Turn around time, though I don't have much to compare it with, is excellent. They take gerber files, and possibly other nonstandard formats as well.

_________________
8 bit fun and games: https://www.aslak.net/
Top
 Profile  
Reply with quote  
GARTHWILSON
 Post subject: Re: Cheap PCB stories...
PostPosted: Tue Mar 08, 2016 8:45 am 
Offline
User avatar

Joined: Fri Aug 30, 2002 1:09 am
Posts: 8545
Location: Southern California
Some here have undoubtedly seen Moosfet's forum post by now, about an EEPROM programmer.  His web page on it has a link to http://www.dirtypcbs.com/ with ultra cheap boards.  I wonder how their quality is.  They have a lot of stock ones too (obviously someone else's custom boards), and a few are quite interesting, including:
  • this SMT-to-DIP adapter set
  • this board and this board to drive a parallel-interface intelligent LCD module with 65c22 serial (using a 74HC595 shift register)
  • this board to drive a parallel-interface intelligent LCD module from I²C, using the MCP23017 I²C port expander
  • this C64 expansion port adapter
  • this TQFP44-to-DIP adapter
  • this LQFP48-to-DIP adapter
  • this SSOP24-to-DIP (skinny) adapter

It looks like they hold the price down ultra low in hopes of selling more of your custom board to others who might decide it suits their need too.  It would probably be good to do a point-to-point and dimensional check on them before using them, in case the originator had an error that the board house doesn't know about.  They take a long time, don't read readme files, have exacting requirements for file extensions, don't allow holes under .012", and are not nice about helping you through problems (because they're not making enough money to give it any human attention) (I can't imagine this one worked out very well), but if you can put up with all that, you get a really inexpensive board, as little as $14 for 10 smallish 2-layer boards.  They also offer 4-, 6-, and 8-layer boards.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources
The "second front page" is http://wilsonminesco.com/links.html .
What's an additional VIA among friends, anyhow?
Top
 Profile  
Reply with quote  
BitWise
 Post subject: Re: Cheap PCB stories...
PostPosted: Tue Mar 08, 2016 8:58 am 
Offline
User avatar

Joined: Tue Mar 02, 2004 8:55 am
Posts: 996
Location: Berkshire, UK
GARTHWILSON wrote:
Some here have undoubtedly seen Moosfet's forum post by now, about an EEPROM programmer. His web page on it has a link to http://www.dirtypcbs.com/ with ultra cheap boards. I wonder how their quality is. They have a lot of stock ones too (obviously someone else's custom boards), and a few are quite interesting, including:
  • this SMT-to-DIP adapter set
  • this board and this board to drive a parallel-interface intelligent LCD module with 65c22 serial (using a 74HC595 shift register)
  • this board to drive a parallel-interface intelligent LCD module from I²C, using the MCP23017 I²C port expander
  • this C64 expansion port adapter
  • this TQFP44-to-DIP adapter
  • this LQFP48-to-DIP adapter
  • this SSOP24-to-DIP (skinny) adapter

It looks like they hold the price down ultra low in hopes of selling more of your custom board to others who might decide it suits their need too. It would probably be good to do a point-to-point and dimensional check on them before using them, in case the originator had an error that the board house doesn't know about. They take a long time, don't read readme files, have exacting requirements for file extensions, don't allow holes under .012", and are not nice about helping you through problems (because they're not making enough money to give it any human attention) (I can't imagine this one worked out very well), but if you can put up with all that, you get a really inexpensive board, as little as $14 for 10 smallish 2-layer boards. They also offer 4-, 6-, and 8-layer boards.

I've used dirtypcbs a few times -- my 1MB SRAM board was made by them. There boards are very good. I've not had any issues.

_________________
Andrew Jacobs
6502 & PIC Stuff - http://www.obelisk.me.uk/
Cross-Platform 6502/65C02/65816 Macro Assembler - http://www.obelisk.me.uk/dev65/
Open Source Projects - https://github.com/andrew-jacobs
Top
 Profile  
Reply with quote  
Aslak3
 Post subject: Re: Cheap PCB stories...
PostPosted: Tue Mar 08, 2016 10:43 pm 
Offline

Joined: Mon Aug 05, 2013 10:43 pm
Posts: 258
Location: Southampton, UK
Aslak3 wrote:
I've used Botechcircuis (http://www.botechcircuits.com/). .... 4 layer boards (which I've not used myself) are $89 at the same size. ...


Have had a 4 layer board made up, and it is a beastie.

Size:264mm x 194mm
4 layer, FR4, 1.6mm
1oz copper thickness
Green soldermask
White silkscreen

It was a entirely throughhole board, with probably the best part of 1000 holes. For 5 pcs it was $200, with $27 DHL. So yeah, not your typical hobby-board. They do look amazing though. :) Hopefully the next board I have made up will be smaller!

_________________
8 bit fun and games: https://www.aslak.net/
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 4
  [ 53 posts ]  Go to page Previous  1, 2, 3, 4  Next

Board index » 6502.org Users Forum » General Discussions

All times are UTC


Who is online

Users browsing this forum: No registered users and 15 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
6502.org is an ongoing project by Mike Naberezny and contributors.